I'm thinking about giving my Anschutz a new stock, and I'm wondering if anyone has had experience with the Parmoor products?
The site is: https://gun-stocks.co.uk/
The video of his copying jig is well worth a watch.
Parmoor Gun Stocks - York
Moderator: dromia
Forum rules
Posting of negative comments in the Gunshop section could bring unwanted criticism on the forum, having said that it is important to let members know if dealings with a Gunshop were less than ideal for you. To that end we will allow what will be known as the 'Scotsgun Ruling'
The Scotsgun Ruling:
>Add Gun Shop here<
"As I've yet to have a 'positive' experience there, I'll refrain from commenting further."
Beyond that please take it up with the Gunshop, if you do resolve the issue in a agreeable manner let us know!
This rule applies to the entire forum.
Posting of negative comments in the Gunshop section could bring unwanted criticism on the forum, having said that it is important to let members know if dealings with a Gunshop were less than ideal for you. To that end we will allow what will be known as the 'Scotsgun Ruling'
The Scotsgun Ruling:
>Add Gun Shop here<
"As I've yet to have a 'positive' experience there, I'll refrain from commenting further."
Beyond that please take it up with the Gunshop, if you do resolve the issue in a agreeable manner let us know!
This rule applies to the entire forum.
-
- Site Admin
- Posts: 17417
- Joined: Fri Nov 05, 2010 7:52 pm
- Location: Wind Swept Denmark
- Contact:
Re: Parmoor Gun Stocks - York
Steve is very good at what he does, give him a ring :)
- Polchraine
- Posts: 6344
- Joined: Sat Nov 06, 2010 11:46 pm
- Location: Middlesex
- Contact:
Re: Parmoor Gun Stocks - York
Interesting video ... although a little long. I noted that he used ordinary Scandinavian Birch Ply ...
"The trouble with quotes on the internet is that it's difficult to discern whether or not they are genuine." - Abraham Lincoln
Why did kamikaze pilots wear helmets?
God loves stupid people, that is why he made so many of them.
-
- Posts: 1047
- Joined: Sat Jun 14, 2014 9:07 am
- Home club or Range: Isle Target Sports Club
- Location: Cambridgeshire
- Contact:
Re: Parmoor Gun Stocks - York
I've got one of those on my CZ452... I bought the unfinished version and stained it, then 10-12 coats of Tru-oil
Gnerally a good fit, needed a little fine tuning but works well..
Daryll.
Gnerally a good fit, needed a little fine tuning but works well..
Daryll.
- Les
- Posts: 4561
- Joined: Mon Apr 28, 2014 12:19 pm
- Home club or Range: WRPC
- Location: Runcorn, via Africa and parts unknown.
- Contact:
Re: Parmoor Gun Stocks - York
Thanks everyone for the info.
I've done the same as Daryll and ordered an unfinished stock. That'll keep me out of mischief for a while once it arrives.
I've done the same as Daryll and ordered an unfinished stock. That'll keep me out of mischief for a while once it arrives.
- Pete
- Full-Bore UK Supporter
- Posts: 2957
- Joined: Tue Sep 15, 2015 8:48 am
- Home club or Range: NRA Bisley
- Contact:
Re: Parmoor Gun Stocks - York
By unfinished, do you mean fully shaped and inletted, just needing bedding, fine sanding, and surface treating with oil or whatever?
Pete
Pete
"Tantum religio potuit suadere malorum" Lucretius
You're offended? Please explain why your inability to control your emotions translates into me having to censor my opinions....
You're offended? Please explain why your inability to control your emotions translates into me having to censor my opinions....
- Les
- Posts: 4561
- Joined: Mon Apr 28, 2014 12:19 pm
- Home club or Range: WRPC
- Location: Runcorn, via Africa and parts unknown.
- Contact:
Re: Parmoor Gun Stocks - York
Yes. It's shaped, inletted and sanded down to 120 grit, so it'll need final sanding and then a finish of your choice. They also do fully finished stocks, using various single woods and mixtures of woods, with some kind of varnish/sealer etc.
The Anschutz BR50-U7 from Intershoot is £600. The same stock from Parmoor - albeit requiring a bit of work - is just short of £230. For my pocket money allowance, that's a total no-brainer.
- Pete
- Full-Bore UK Supporter
- Posts: 2957
- Joined: Tue Sep 15, 2015 8:48 am
- Home club or Range: NRA Bisley
- Contact:
Re: Parmoor Gun Stocks - York
That maple and walnut comfort stock looks really ace, I'll maybe give him a call.
Pete
Pete
"Tantum religio potuit suadere malorum" Lucretius
You're offended? Please explain why your inability to control your emotions translates into me having to censor my opinions....
You're offended? Please explain why your inability to control your emotions translates into me having to censor my opinions....
Who is online
Users browsing this forum: No registered users and 2 guests