annealing machine on ebay

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
spartan7510
Posts: 193
Joined: Tue May 06, 2014 10:29 pm
Home club or Range: HHRC
Contact:

annealing machine on ebay

#1 Post by spartan7510 »

anyone own one of these - www.caselife.co.uk

also been advertised on ebay, look very similar to the American Annealeez? What do they operate like - any good?
Christel
Site Admin
Posts: 17347
Joined: Fri Nov 05, 2010 7:52 pm
Location: Wind Swept Denmark
Contact:

Re: annealing machine on ebay

#2 Post by Christel »

That might be the best machine in the world, I would not buy it.

When I looked at the website I found no info, who are they?

The return and refund policy is not what I would want as a customer.

48 hours return window...30% restocking fee.

I am pretty sure the 48 hours is against the consumer act.

Just my two cents.
User avatar
WelshShooter
Site Supporter Since 2016
Posts: 1804
Joined: Wed Jun 25, 2014 9:45 pm
Contact:

Re: annealing machine on ebay

#3 Post by WelshShooter »

I echo christel on this one. It takes them 24-72 hours to process an order but you only have 2 houses to cancel your order? Also you can only return an item in an unopened condition without ever having used it PLUS they charge you 30% for "restocking"?

I'd have a Google for the annealing machine made by lubo(?) as advertised on the stalking directory, but has been discussed also on this forum.
1066
Site Supporter Since 2015
Posts: 2158
Joined: Wed Aug 31, 2011 7:05 pm
Contact:

Re: annealing machine on ebay

#4 Post by 1066 »

spartan7510 wrote:anyone own one of these - http://www.caselife.co.uk

also been advertised on ebay, look very similar to the American Annealeez? What do they operate like - any good?
Looks a total rip-off of the Annealeeze system with two synchronous feed rollers - I've tried various plastic feed rollers in the past but would now only use aluminium.

Here's an old plastic feed roller model:
https://www.youtube.com/watch?v=ssAYLvHIw0E&t=113s
and here's a more recent aluminium feed roller:
https://www.youtube.com/watch?v=4ObX4_YVOeY&t=17s
TARGETMASTER
an altogether better trickler
www.targetmasteruk.com
User avatar
Alpha1
Site Supporter Since 2020
Posts: 8553
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: annealing machine on ebay

#5 Post by Alpha1 »

The machine made by Lubo is very popular.
spartan7510
Posts: 193
Joined: Tue May 06, 2014 10:29 pm
Home club or Range: HHRC
Contact:

Re: annealing machine on ebay

#6 Post by spartan7510 »

1066 wrote:
spartan7510 wrote:anyone own one of these - http://www.caselife.co.uk

also been advertised on ebay, look very similar to the American Annealeez? What do they operate like - any good?
Looks a total rip-off of the Annealeeze system with two synchronous feed rollers - I've tried various plastic feed rollers in the past but would now only use aluminium.

Here's an old plastic feed roller model:
https://www.youtube.com/watch?v=ssAYLvHIw0E&t=113s
and here's a more recent aluminium feed roller:
https://www.youtube.com/watch?v=4ObX4_YVOeY&t=17s
Watched your videos, your design looks really good and professional (better than Annealeez). Any plans to start production and sell them?
spartan7510
Posts: 193
Joined: Tue May 06, 2014 10:29 pm
Home club or Range: HHRC
Contact:

Re: annealing machine on ebay

#7 Post by spartan7510 »

Alpha1 wrote:The machine made by Lubo is very popular.
is he the fella called raptor on UKvarminting - http://ukvarminting.com/topic/34848-annealing-machine/
Gazza
Posts: 2238
Joined: Thu Apr 28, 2016 8:45 am

Re: annealing machine on ebay

#8 Post by Gazza »

The 30% restocking fee would indicate a lot of returns, probably due to it being shiote :D
Poor website too teanews
User avatar
Pete
Past Supporter
Posts: 2947
Joined: Tue Sep 15, 2015 8:48 am
Home club or Range: NRA Bisley
Contact:

Re: annealing machine on ebay

#9 Post by Pete »

Yes Raptor.......and his machine is excellent at a no-brainer price.
I've had mine for a couple of years now.

Pete
"Tantum religio potuit suadere malorum" Lucretius
You're offended? Please explain why your inability to control your emotions translates into me having to censor my opinions....
Tac20 mark
Posts: 67
Joined: Tue Nov 20, 2018 3:07 pm
Contact:

Re: annealing machine on ebay

#10 Post by Tac20 mark »

yeah I got a raptor one for my 20 tac and 6br brass excellent so far
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests