Brass case cleaning
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: Brass case cleaning
'works very well on my blacks' could be taken the wrong way. Lol
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
Gazza
Re: Brass case cleaning
You could pop a couple of nice free range chucky eggs in with the brass and when it's done have a tasty egg mayonnaise sandwich with cress side garnish. Top tip there 
-
Rem260
Re: Brass case cleaning
Hi Mauserbill
Where the cases tarnished before you placed them in the fryer. Or is it just for removing the powder residue.
Where the cases tarnished before you placed them in the fryer. Or is it just for removing the powder residue.
Who is online
Users browsing this forum: No registered users and 1 guest