OAL gauges
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
OAL gauges
I have managed to get the right feed gears in for the lathe so I tried them out today building a couple of OAL gauges. They just need the thumb screws fitting and the measuring slots cutting, then a good polish and they are ready to go.
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Re: OAL gauges
Are you to be selling these?
It's not the pace of life that concerns me, it's the sudden stop at the end!
Re: OAL gauges
I will be very shortly mostly to fund my machine tool addiction 
I am currently wrapping up a couple of jobs and will then start building up a list of modest items such as these. My plan is to offer a better item for less money, in an ideal world no more than 65% of the going rate which is doable as long as I try not to think of the time I spend on them.
Mostly it is for pleasure, it keeps my mind active and if I can make items for myself I can make them for others.
I am currently wrapping up a couple of jobs and will then start building up a list of modest items such as these. My plan is to offer a better item for less money, in an ideal world no more than 65% of the going rate which is doable as long as I try not to think of the time I spend on them.
Mostly it is for pleasure, it keeps my mind active and if I can make items for myself I can make them for others.
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Re: OAL gauges
:lol: :lol: :lol: :lol:Dangermouse wrote:It is important to keep your mind active as you get older...
I'll have one for 308 when they are ready. What about bore guides along the lines of the Lucas model?
It's not the pace of life that concerns me, it's the sudden stop at the end!
Re: OAL gauges
I have just finished building a rod guide for Accuracy International actions, it is a 'close' copy to those issued. The Lucas guides are very nice and incredibly easy to build something similar, with inserts to suit, the problem is I cannot form the slot yet. I need a small Mill and it is on the shopping list as I have a whole load of things I could use it for.Mike357 wrote:I'll have one for 308 when they are ready. What about bore guides along the lines of the Lucas model?
SHED!Robin128 wrote:Branding ovenpaa!
Re: OAL gauges
I have had a think about it and I can do this, what action is it for Mike?Mike357 wrote:What about bore guides along the lines of the Lucas model?
-
Mike357
- Posts: 3637
- Joined: Sat Dec 04, 2010 7:25 pm
- Home club or Range: NRA, Bisley, Dundee Rifle & Pistol Club & Bishop Auckland GC
- Location: Near Durham(ish)!
- Contact:
Re: OAL gauges
REM 700 Short Action.
Fantastic!
Fantastic!
It's not the pace of life that concerns me, it's the sudden stop at the end!
Re: OAL gauges
I don't have a REM 700 in the cabinet so I will need a couple of dimensions please Mike.
I will PM you.
I will PM you.
Who is online
Users browsing this forum: Google [Bot] and 1 guest