Forster 223 Rem full length sizing die - opinions needed
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
dromia
- Site Admin
- Posts: 20229
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Forster 223 Rem full length sizing die - opinions needed
Hornady Unique is every bit as good as imperial and loads cheaper.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: Forster 223 Rem full length sizing die - opinions needed
Im a big fan of Hornady Unique lube I use it all the time.
Re: Forster 223 Rem full length sizing die - opinions needed
jmc67 what lube are you using inside the case neck?
I use powdered graphite, that combined with imperial sizing wax on the case body and I've never had any problems full length resizing .223rem using Lee dies.
I use powdered graphite, that combined with imperial sizing wax on the case body and I've never had any problems full length resizing .223rem using Lee dies.
-
jmc67
- Full-Bore UK Supporter
- Posts: 406
- Joined: Fri Nov 23, 2012 6:48 pm
- Home club or Range: NRA, Bisley
- Location: Egham, Surrey
- Contact:
Re: Forster 223 Rem full length sizing die - opinions needed
I was using Lee lube, but based on the feedback here I'll be changing that now.Chapuis wrote:jmc67 what lube are you using inside the case neck?
I use powdered graphite, that combined with imperial sizing wax on the case body and I've never had any problems full length resizing .223rem using Lee dies.
Who is online
Users browsing this forum: Google [Bot] and 3 guests