Hi
I presently have my 243 zeroed at 100 yds with hornady whitetail 100gr ( 2960fps .405 BC )
I have purchased some 55gr Federal 3850fps Nosler® Ballistic Tip® 0.276
Without adjusting my scope, is there anyway of working out the effective zero using the 55gr ammo?
I have posted this on the SD forum, but not quite got the answer.
Eddie.
One for the Ballistic gurus
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: One for the Ballistic gurus
Yes Eddie shoot the 55 grn ammo at 100 yards and find your point of impact. Then adjust your point of aim accordingly.
Forget all about the theoretical or advertised data or any computer predictions because unless you actually run the ammo through your rifle you will never find out how close to being true any of it is. There is no substitute for range testing with your rifle and ammo, anything else will only be a guesstimate.
Forget all about the theoretical or advertised data or any computer predictions because unless you actually run the ammo through your rifle you will never find out how close to being true any of it is. There is no substitute for range testing with your rifle and ammo, anything else will only be a guesstimate.
- Pete
- Full-Bore UK Supporter
- Posts: 3083
- Joined: Tue Sep 15, 2015 8:48 am
- Home club or Range: NRA Bisley
- Contact:
Re: One for the Ballistic gurus
What Chapuis said.............such calculations (eg Litz) may "get you on the paper", but in my experience, that's about all.
Pete
Pete
"Tantum religio potuit suadere malorum" Lucretius
You're offended? Please explain why your inability to control your emotions translates into me having to censor my opinions....
You're offended? Please explain why your inability to control your emotions translates into me having to censor my opinions....
- dromia
- Site Admin
- Posts: 20229
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: One for the Ballistic gurus
Theory and practice, rarely the twain meet with exactitude.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: One for the Ballistic gurus
Much what I thought really... I was hoping that some one was going to say ... Yes I have done it and it's the equivalent equivalent of a 180yd zero...
Eddie.
Eddie.
Who is online
Users browsing this forum: No registered users and 4 guests