Is it possible to make 22LR tracers at home?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Is it possible to make 22LR tracers at home?
Why .22 when there are other calibres of tracer available on the market?

Re: Is it possible to make 22LR tracers at home?
I dont really know to be honestBamBam wrote:Why .22 when there are other calibres of tracer available on the market?


- bradaz11
- Full-Bore UK Supporter
- Posts: 4789
- Joined: Mon Jun 02, 2014 1:23 am
- Home club or Range: The tunnel at Charmouth, BWSS
- Location: Bristol
- Contact:
Re: Is it possible to make 22LR tracers at home?
what about 12g slug tracer ?
When guns are outlawed, only Outlaws will have guns
Re: Is it possible to make 22LR tracers at home?
Could you not just put the cartridge in a vice, drill through the bullet and fill the hole with ground match stick heads?*
*
*
Re: Is it possible to make 22LR tracers at home?
I would think about 50,000 psi would push out the superglue or what ever you were hoping to seal them with. :)Egg on Leggs1 wrote:Could you not just put the cartridge in a vice, drill through the bullet and fill the hole with ground match stick heads?*
*
- Les
- Posts: 4561
- Joined: Mon Apr 28, 2014 12:19 pm
- Home club or Range: WRPC
- Location: Runcorn, via Africa and parts unknown.
- Contact:
Re: Is it possible to make 22LR tracers at home?
Gazza, if you get yourself A RFD licence and an import licence etc etc, you might be able to get some from here:-
http://pineymountainammunitionco.com/
Failing that, there's always the match head route.

http://pineymountainammunitionco.com/
Failing that, there's always the match head route.

Re: Is it possible to make 22LR tracers at home?
I dont think I'll bother with the RFD route just to get hold of a few tracers
I'll try the match heads though, nice and cheap. Do you think any particular brand would be best?

I'll try the match heads though, nice and cheap. Do you think any particular brand would be best?

- Les
- Posts: 4561
- Joined: Mon Apr 28, 2014 12:19 pm
- Home club or Range: WRPC
- Location: Runcorn, via Africa and parts unknown.
- Contact:
Re: Is it possible to make 22LR tracers at home?
It would definitely have to be Bengal matches. They're probably about as rare as 22lr tracers, though.Gazza wrote:
I'll try the match heads though, nice and cheap. Do you think any particular brand would be best?

https://www.youtube.com/watch?v=HnCci93-Hmg
https://www.youtube.com/watch?v=dgrTsYSPKBw
Re: Is it possible to make 22LR tracers at home?
In Dromia speak, are tracers glow in the dark condoms?
Who is online
Users browsing this forum: No registered users and 6 guests