Following on from post about what moderator to purchase I went to our local gunshop to have a look at them and a discussion. I thought the thread might be 1/2 unf but upon trying that adaptor and various others we couldn't find one that fitted.
Does anyone with a lantac 223 straightpull know what the thread is? The current muzzle 'device' I had as standard from Lantac was an a2 flashhider which when I googled the thread was 1/2 unf but I don't know whether Lantac use a different thread or their own design etc. Any help would be appreciated!
Lantac 5.56/ 223 muzzle thread size for fitting a moderator
Moderator: dromia
Re: Lantac 5.56/ 223 muzzle thread size for fitting a modera
1/2" x 28 UNEF.
That's standard for any AR.
That's standard for any AR.
-
JS569
Re: Lantac 5.56/ 223 muzzle thread size for fitting a modera
Thanks Bam Bam. Is that quite a fine thread?
Re: Lantac 5.56/ 223 muzzle thread size for fitting a modera
Yes, it's 28 threads per inch, hence 1/2" x 28 TPI UNEF. UK most common 1/2" x 20 is only 20 threads per inch(tpi).JS569 wrote:Thanks Bam Bam. Is that quite a fine thread?
-
Mattnall
- Full-Bore UK Supporter
- Posts: 2939
- Joined: Wed Mar 06, 2013 5:32 pm
- Home club or Range: NRA, Redricks TSC, BS1944RC, HRA
- Location: East Herts
- Contact:
Re: Lantac 5.56/ 223 muzzle thread size for fitting a modera
In a ½" UN thread, 13tpi is coarse (UNC), 20tpi is fine (UNF) and 28 is extra fine (UNEF).
Arming the Country, one gun at a time.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Who is online
Users browsing this forum: No registered users and 5 guests