45 Super - anybody used it?

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
jmc67
Full-Bore UK Supporter
Posts: 406
Joined: Fri Nov 23, 2012 6:48 pm
Home club or Range: NRA, Bisley
Location: Egham, Surrey
Contact:

45 Super - anybody used it?

#1 Post by jmc67 »

Was wondering if anyone had any experience with using 45 Super? My understanding is that it is the same dimensions as 45acp but uses different brass and runs at a higher pressure. I have a 45acp Armalon gallery rifle built around a no4 action, so from a pressure point of view the action should easily be able to handle it, however I am keen to hear from anyone who's used it.
Post Reply

Who is online

Users browsing this forum: No registered users and 3 guests