Recommended Reloading Manual
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Recommended Reloading Manual
Hi
I have and use Richard Lee's Modern Reloading, plus of c ourse all the information available on the Internet.
Which manual or manuals should I acquire in addition, to help me with reloading.
Regards Norman
I have and use Richard Lee's Modern Reloading, plus of c ourse all the information available on the Internet.
Which manual or manuals should I acquire in addition, to help me with reloading.
Regards Norman
Re: Recommended Reloading Manual
Lyman.
For up to date info visit the powder or the component manufactures web site.
For up to date info visit the powder or the component manufactures web site.
- dromia
- Site Admin
- Posts: 20227
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Recommended Reloading Manual
The Lyman, their latest 50th edition is recently out.
The Lee is not a good data source, they do not test loads they just copy other peoples data including their typos and then throw in a few of their own. The data is conservative to accommodate their own peculiarities like volume rather than weight data and their singular cast bullet approach. A rather cursory approach aimed at selling their products.
The Lee is not a good data source, they do not test loads they just copy other peoples data including their typos and then throw in a few of their own. The data is conservative to accommodate their own peculiarities like volume rather than weight data and their singular cast bullet approach. A rather cursory approach aimed at selling their products.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
- Posts: 343
- Joined: Thu Feb 11, 2016 6:33 pm
- Home club or Range: Offas Dyke, Pickering, North Cotes Butts and Grove small arms
- Location: Brookenby, Lincolnshire
Re: Recommended Reloading Manual
Most of the reloading manuals have a large section at the front on the process and procedures for reloading and there's not too much variation between them
As far as data goes the internet is probably the best source for the most current data
Recommend that you stick with the powder manufacturers for best options
As far as data goes the internet is probably the best source for the most current data
Recommend that you stick with the powder manufacturers for best options
- DaveB
- Posts: 1594
- Joined: Thu Dec 05, 2013 7:11 am
- Home club or Range: Wellington Service Rifle Assocaition; NZ Deerstalkers Association; Wairarapa Pistol & Shooting Sports Club
- Location: Upper Hutt, New Zealand
- Contact:
Re: Recommended Reloading Manual
I have always used Sierra - lately the Sierra Suite CD-ROM which contains a very useful external ballistics calculator.
-
- Posts: 343
- Joined: Thu Feb 11, 2016 6:33 pm
- Home club or Range: Offas Dyke, Pickering, North Cotes Butts and Grove small arms
- Location: Brookenby, Lincolnshire
Re: Recommended Reloading Manual
I got the impression that the OP was directed at books on how to reload and best practices rather that reloading data
Re: Recommended Reloading Manual
Both aspects really I've got lots of data from the electric web, I just like to read around the subject as well.Duey wrote:I got the impression that the OP was directed at books on how to reload and best practices rather that reloading data
Ordered a Lyman Manual so that should help
Thanks for the info so far
Norman
-
- Posts: 1048
- Joined: Sat Jun 14, 2014 9:07 am
- Home club or Range: Isle Target Sports Club
- Location: Cambridgeshire
- Contact:
Re: Recommended Reloading Manual
Hmmm... does this mean i should buy a new manual?? Still using the one i bought when I first started reloading... Speer number 11, 1988... 

Re: Recommended Reloading Manual
This.Duey wrote:Most of the reloading manuals have a large section at the front on the process and procedures for reloading and there's not too much variation between them
As far as data goes the internet is probably the best source for the most current data
Recommend that you stick with the powder manufacturers for best options
Techniques will vary depending on what you are loading and what for, but most manufacturers publish data online that stays in date.
Who is online
Users browsing this forum: No registered users and 2 guests