Here is another url for KAL
http://kal.castpics.net/
Snider boolit moulds
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Gazoo
Re: Snider boolit moulds
I just bought a solid snider .600, 530 gr RN mold from Xring services, good bloke , in post that afternoon, have not tried it out yet but will let you know.
-
dromia
- Site Admin
- Posts: 20227
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Snider boolit moulds
Aye nice moulds made by Tom at Accurate so quality is there however they have not given as good results in my Sniders as the KAL Paradox does.
X-rings designs are also available direct from Accurate they are in the catalogue and are around $10 cheaper.
X-rings designs are also available direct from Accurate they are in the catalogue and are around $10 cheaper.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
Gazoo
Re: Snider boolit moulds
customs have had this mould for 3 weeks now, supposed to delivery last thursday, then friday, then today ....still waiting !!
Who is online
Users browsing this forum: No registered users and 3 guests