The only stupid question is the one not asked.
One of the reasons the forum is here is to help.
Always better safe than sorry.
Dragunov/Izhmash Tigr owners that reload
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
dromia
- Site Admin
- Posts: 20227
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Dragunov/Izhmash Tigr owners that reload
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
WelshShooter
- Full-Bore UK Supporter
- Posts: 1812
- Joined: Wed Jun 25, 2014 9:45 pm
- Contact:
Re: Dragunov/Izhmash Tigr owners that reload
That seems like a pretty small step in fairness. If you're worried about over working the brass then consider annealing every other sizing if you want.
As an example, look at case forming. You radically change the shape of the case neck during the sizing operation. In most of the cases the work hardening can be alleviated through annealing. However, this is different compared to your circumstance because you only case form once, whereas you would be doing this quite often. Might be worth looking for a broken shell extractor for 7.62x54mmR. I've seen them in .303brit, .308win and 7.62x39 but can't say I've tried looking for 7.62x54mmR. I've had case-head and case-neck failures (thanks Sellior & Bellot!) during extraction which were removed using my nice broken shell extractor. Might be worth having one (if they exist in this calibre) if you go down this route.
As an example, look at case forming. You radically change the shape of the case neck during the sizing operation. In most of the cases the work hardening can be alleviated through annealing. However, this is different compared to your circumstance because you only case form once, whereas you would be doing this quite often. Might be worth looking for a broken shell extractor for 7.62x54mmR. I've seen them in .303brit, .308win and 7.62x39 but can't say I've tried looking for 7.62x54mmR. I've had case-head and case-neck failures (thanks Sellior & Bellot!) during extraction which were removed using my nice broken shell extractor. Might be worth having one (if they exist in this calibre) if you go down this route.
-
bnz41
- Posts: 1990
- Joined: Sat Nov 06, 2010 4:20 pm
- Home club or Range: NRA Bisley
- Location: Essex
- Contact:
Re: Dragunov/Izhmash Tigr owners that reload
Case extractor look here http://www.brownells.com/gunsmith-tools ... 24626.aspx I bought mine from here, one for every calibre I use.
Or here. http://www.ebay.co.uk/itm/Broken-Shell- ... 1113518622
Or here. http://www.ebay.co.uk/itm/Broken-Shell- ... 1113518622
Who is online
Users browsing this forum: No registered users and 4 guests