Anything shooting related including law and procedure questions.
Moderator: dromia
Forum rules
HH1
#11
Post
by HH1 Mon Jul 11, 2016 3:11 pm
joe wrote: Do you think it will run 500 rounds of fmj in one session without problems
I really don't see why not. The maximum amount that I have put through mine at one time was a 100 rounds.
I have no idea what the buffer for the 9mm weighs or if there is a difference between the 9mm and .45
I could weigh the buffer for you if you would really like to know.
bradaz11
Full-Bore UK Supporter
Posts: 4791 Joined: Mon Jun 02, 2014 1:23 amHome club or Range: The tunnel at Charmouth, BWSSLocation: Bristol
Contact:
#12
Post
by bradaz11 Mon Jul 11, 2016 4:23 pm
The buffer is a 556 buffer. I have a carbine in mine with a small spacer to take up the slack in the tube
When guns are outlawed, only Outlaws will have guns
joe
#13
Post
by joe Mon Jul 11, 2016 5:15 pm
bradaz11 wrote: The buffer is a 556 buffer. I have a carbine in mine with a small spacer to take up the slack in the tube
intresting, from reading online about 9mm AR's they normally use a heavier buffer to stop the blow back bolt from comming back too early
Sim G
Posts: 10753 Joined: Sat Nov 06, 2010 9:09 pm
Contact:
#14
Post
by Sim G Mon Jul 11, 2016 5:35 pm
The bolt on the SGC lever release is not a standard 9mm AR bolt. It's SGCs own and weighs over 13oz alone!
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Mattnall
Full-Bore UK Supporter
Posts: 2943 Joined: Wed Mar 06, 2013 5:32 pmHome club or Range: NRA, Redricks TSC, BS1944RC, HRALocation: East Herts
Contact:
#15
Post
by Mattnall Mon Jul 11, 2016 5:55 pm
joe wrote: bradaz11 wrote: The buffer is a 556 buffer. I have a carbine in mine with a small spacer to take up the slack in the tube
intresting, from reading online about 9mm AR's they normally use a heavier buffer to stop the blow back bolt from comming back too early
The heavier buffer reduces the cyclic rate to help feed on full auto and to reduce bolt bounce, both are not an issue for the SGC LR rifle.
Arming the Country, one gun at a time.
joe
#16
Post
by joe Mon Jul 11, 2016 6:15 pm
Mattnall wrote: joe wrote: bradaz11 wrote: The buffer is a 556 buffer. I have a carbine in mine with a small spacer to take up the slack in the tube
intresting, from reading online about 9mm AR's they normally use a heavier buffer to stop the blow back bolt from comming back too early
The heavier buffer reduces the cyclic rate to help feed on full auto and to reduce bolt bounce, both are not an issue for the SGC LR rifle.
good info
HH1
#17
Post
by HH1 Mon Jul 11, 2016 7:05 pm
...... and for everyone who is interested .... the buffer in my SGC 9mm weighs 161 grams :)
joe
#18
Post
by joe Mon Jul 11, 2016 9:30 pm
HH1 wrote: ...... and for everyone who is interested .... the buffer in my SGC 9mm weighs 161 grams :)
cool, whats is it like to shoot ? is the action smooth
Users browsing this forum: No registered users and 1 guest
good info