My first target rifle was a 7.62 Fultons regulated 1932 Czech Mauser action with a S and L barrel, a Brindles trigger and PH sights..........cracking old rifle.
I needed it off ticket some years ago, and Fultons gave me £50 for it.
Pete
Cast bullets in .308
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Pete
- Full-Bore UK Supporter
- Posts: 3083
- Joined: Tue Sep 15, 2015 8:48 am
- Home club or Range: NRA Bisley
- Contact:
Re: Cast bullets in .308
"Tantum religio potuit suadere malorum" Lucretius
You're offended? Please explain why your inability to control your emotions translates into me having to censor my opinions....
You're offended? Please explain why your inability to control your emotions translates into me having to censor my opinions....
Re: Cast bullets in .308
Crikey Pete, that ticked all the boxes for me, I wonder what happened to it...
Re: Cast bullets in .308
Once you have your chamber/bore dimensions, consider Mountain Molds if you need something custom made (within reason).
EDIT: I'm no expert, quite new to casting, so I'd love to know if there is a UK equivalent of MM.
EDIT: I'm no expert, quite new to casting, so I'd love to know if there is a UK equivalent of MM.
-
dromia
- Site Admin
- Posts: 20229
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Cast bullets in .308
I have a few MM moulds that I bought second hand and they are fine, however I have never got their online mould design function to work. If you have I would be interested in the instructions.
I prefer Accurate or Brooks if I want something special, far easier to deal with in my experience
There should be no need for a custom job for this project, plenty of good off the shelf 30 calibre moulds in sensible diameters around.
I prefer Accurate or Brooks if I want something special, far easier to deal with in my experience
There should be no need for a custom job for this project, plenty of good off the shelf 30 calibre moulds in sensible diameters around.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: Cast bullets in .308
Range day to morrow so I get to appraise the donor rifle and shoot it with jacketed .308 bullets. Ill post some pics.
Then Ill be removing the aperture sights so I can dispose of them and anything else that I think is worth flogging to fund the project. Ill be measuring the barrel length diameter etc. and checking that the barrel will hopefully fit in my lathe OK for the machining work.
I'm a bit concerned about the rear aperture sight I know nothing about target rifles and I'm guessing that the receiver will have been drilled and tapped to mount the rear sight I'm not sure how that will work if I want to mount a scope base.
Then Ill be removing the aperture sights so I can dispose of them and anything else that I think is worth flogging to fund the project. Ill be measuring the barrel length diameter etc. and checking that the barrel will hopefully fit in my lathe OK for the machining work.
I'm a bit concerned about the rear aperture sight I know nothing about target rifles and I'm guessing that the receiver will have been drilled and tapped to mount the rear sight I'm not sure how that will work if I want to mount a scope base.
Re: Cast bullets in .308
Handled it to day its a Shutz and Larsen barrelled .308 target rifle G98 action fitted with parker hale aperture sight. Its regulated by fultons it shoots great.
Pics to follow.
Pics to follow.
Re: Cast bullets in .308
1:14 twist?
Re: Cast bullets in .308
Not sure about the twist Ill have to check.
The rear sight is surplus to requirements and maybe the stock. Ill probably shorten the barrel as well.
(Maybe being the operative word.)
To be honest I was quite shocked having never fired a target rifle before at how accurate it is. I benched it with the but resting on a sand bag its amazingly accurate considering its iron sights. The rear sight is a joy to behold. I'm thinking I should of bought a clunker I am going to have to take deep breaths before pressing the start button on the lathe. Oh and it will fit on my lathe the barrel will go through the head stock so no worries there. I'm going to have to think long and hard about this one.
(Maybe being the operative word.)
To be honest I was quite shocked having never fired a target rifle before at how accurate it is. I benched it with the but resting on a sand bag its amazingly accurate considering its iron sights. The rear sight is a joy to behold. I'm thinking I should of bought a clunker I am going to have to take deep breaths before pressing the start button on the lathe. Oh and it will fit on my lathe the barrel will go through the head stock so no worries there. I'm going to have to think long and hard about this one.
Re: Cast bullets in .308
Is that one of the post was Danish built target rifles? S&L built them and the DK Government officially owned them then (From memory) In the 1980's the owners had the chance to fully own them and at that point they were dispersed to the four winds. I have some notes on them somewhere.
The S&L barrel was also widely used in the earlier days of the likes of the SWING as they worked superbly with the 147 grain issue ammunition of the time. It would be a shame to chop one up for no reason...
The S&L barrel was also widely used in the earlier days of the likes of the SWING as they worked superbly with the 147 grain issue ammunition of the time. It would be a shame to chop one up for no reason...
Re: Cast bullets in .308
To late now I have spent a fortune on it I gave him £60 of my hard earned cash.
Seriously though having seen it in the flesh and fired it I'm in two minds what to do with it now.
Seriously though having seen it in the flesh and fired it I'm in two minds what to do with it now.
Who is online
Users browsing this forum: No registered users and 8 guests