factory 30-30 fmj ?

Anything Fullbore rifle related, Hunting, Target, Match.

Moderator: dromia

Message
Author
User avatar
Alpha1
Posts: 8625
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: factory 30-30 fmj ?

#11 Post by Alpha1 »

Flat nose is the way to go.
User avatar
Sim G
Posts: 10752
Joined: Sat Nov 06, 2010 9:09 pm
Contact:

Re: factory 30-30 fmj ?

#12 Post by Sim G »

The .30-30 is a great cartridge and I've been shooting one for a couple of decades now from anything between 25 and 300 yards. Cast bullets and either Unique or Trail Boss for a gallery load and full power SJFP for longer.

There's no need for FMJ. Guidance on Firearms Law states that flat point expanding ammunition falls into s1 when used in order to prevent a tubular magazine detonation. It's been like this for 15 years.

Privi makes some reasonably priced factory ammo, but it's hot. It didn't shoot that well in either of my 30-30s. But the brass is very good.

Guide on Firearms Licensing Law
December 2015

3.21 Category (xv) refers to ammunition incorporating a projectile that is designed or adapted to expand in a controlled manner. It is the kind of ammunition used in deerstalking and vermin control because it is more likely than non-expanding ammunition to ensure a quick and humane kill. Semi-jacketed soft point and hollow point are typical forms of expanding ammunition, but care must be taken to distinguish between match target hollow point ammunition, which has a tiny hole at the front for manufacturing purposes, and true hollow point. Match hollow point rounds which are not designed to expand upon impact, such as the Sierra Match King and the Hornady A-Max, are not prohibited. Flat-nosed bullets, which are designed to prevent a magazine explosion caused, by a pointed bullet resting on the primer of the cartridge ahead of it when the ammunition is used in a tubular magazine are also not prohibited. All bullets will distort on impact, but only those which were designed or adapted to do so in a predictable manner fit this category.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?

Guns dont kill people. Dads with pretty Daughters do...!
User avatar
dromia
Site Admin
Posts: 20223
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: factory 30-30 fmj ?

#13 Post by dromia »

You can shoot cast in this fine cartridge easily out to 300 yrds.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
joe

Re: factory 30-30 fmj ?

#14 Post by joe »

sweet, there is ammo is in the usa called leverevolution by Hornady speciafully designed for lever actions but no doubt you cant get them here
User avatar
Sim G
Posts: 10752
Joined: Sat Nov 06, 2010 9:09 pm
Contact:

Re: factory 30-30 fmj ?

#15 Post by Sim G »

Yes you can. Made by Hornady. The bullets are also available. It was this ammo that prompted Marlin to introduce the XLR variants of the 336 and 1895. They are expensive though. But, as said, no need for them unless you want a premium hunting bullet. There's plenty of other stuff about.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?

Guns dont kill people. Dads with pretty Daughters do...!
User avatar
Sim G
Posts: 10752
Joined: Sat Nov 06, 2010 9:09 pm
Contact:

Re: factory 30-30 fmj ?

#16 Post by Sim G »

Shouldn't have stated "Made by Hornady", should have said available from Hannams.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?

Guns dont kill people. Dads with pretty Daughters do...!
User avatar
Mattnall
Full-Bore UK Supporter
Posts: 2939
Joined: Wed Mar 06, 2013 5:32 pm
Home club or Range: NRA, Redricks TSC, BS1944RC, HRA
Location: East Herts
Contact:

Re: factory 30-30 fmj ?

#17 Post by Mattnall »

I have some 147gn FMJ and tracer bullets that load nicely in to the 30-30 cartridge but only for single feeding. Great out to 500yds from an old Winchester and great on ETR.
150gn Lead FP gas checked for up to 300yds.
Arming the Country, one gun at a time.

Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Rab

Re: factory 30-30 fmj ?

#18 Post by Rab »

Brownells has the flextip (leverevolution) bullets in stock if you're still interested in reloading yourself. http://www.brownells.co.uk/epages/UK.sf ... /749009731
Mike95
Posts: 364
Joined: Sat Jan 24, 2015 2:40 pm
Home club or Range: Harrowden Rifle Club
Contact:

Re: factory 30-30 fmj ?

#19 Post by Mike95 »

H and N high speed copper plated bullets 165 gn TC....308 great for the lever actions, cost less than cast. Good to 2000 fps.
Mike95
User avatar
dromia
Site Admin
Posts: 20223
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: factory 30-30 fmj ?

#20 Post by dromia »

Mike95 wrote:cost less than cast.
Mike95
I doubt that.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
Post Reply

Who is online

Users browsing this forum: No registered users and 4 guests