Does he just need to get his Coffin set-up?Alpha1 wrote:Bram has got the documents unfortunately he is moving house this weekend but he will sort it early next week when his internet is back up
Any Dutch speakers here?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
Demonic69
Re: Any Dutch speakers here?
Re: Any Dutch speakers here?
Brams back on line the web site is back up and the servers are running he is going to translate it and I should have the info on Sunday.
Re: Any Dutch speakers here?
It seems we only have the Dutch article I don't have the German one if you can post that he can probably translate that one as well.
Re: Any Dutch speakers here?
Oops I forgot about this Bram translated the Dutch version I will post the translation when I get in this evening. Seems they were impressed.
Targetmaster trickler Dutch review translated.
Roughly translated by my Dutch friend.
Targetmaster trickler
Electronic powder dispensers that are actuated digitally are hip and trendy these days. Ninety percent of the owners will not perform any better shooting but who cares?
Every man with an interest in technical stuff will enjoy a buzzing vibrating device that independently dispensers powder and deposits it in cup at a precise one tenth of a grain. (For outsiders that is 0.0065 gram !!!)
Such a powder dispenser will cost a lot of money and its precision which we might not notice will stop most people buying one.
But the target master only costs 119 pounds plus postage, at about 160 euros that is doable. The idea is brilliant and the finish is practical and neat. The targetmaster consists of 2 parts : the powder trickler unit and the sensor unit. The third part is a conventional scale. That is not included in the price.
The producer of the targetmaster assumes that anyone reloading has already got a conventional beam scale. The funny thing is that the beam scale actually triggers the electronics. As the vibrating powdertrickler dumps the grains into the cup the long scalearm rises and interrupts the infra red beam of the sensor unit exactly at the right time. That unit then turns the trickler off. The good thing is that the beam scale will show the actual weight. This will work no matter what. And lets not forget very smart.
Allan Edwards invented this in the 80s when he often needed extreme small loads for his 32 S&W paladin match pistol.
He made prototype after prototype perfecting a targetmaster. Allan produces every component himself, even the plastic housing. Being used to working with simple electronics he developed some thing he can make himself with some extra possibilities.
The inventor did a fantastic job on the mechanical side and for this the inventor deserves our respect. The whole set looks very nice. A jackplug and cable connects the trickler to the sensor unit. The switches are heavy duty and every charge can be started with the red knob on top of the trickler. The height of the sensor arm can be adjusted and also the angle of the powdertrickler (this will effect the speed and accuracy). Four AA batteries supply the power for 250 loads. Do you want to see it in action ? Surf to www.targetmasteruk.com Be Impressed.
Targetmaster trickler
Electronic powder dispensers that are actuated digitally are hip and trendy these days. Ninety percent of the owners will not perform any better shooting but who cares?
Every man with an interest in technical stuff will enjoy a buzzing vibrating device that independently dispensers powder and deposits it in cup at a precise one tenth of a grain. (For outsiders that is 0.0065 gram !!!)
Such a powder dispenser will cost a lot of money and its precision which we might not notice will stop most people buying one.
But the target master only costs 119 pounds plus postage, at about 160 euros that is doable. The idea is brilliant and the finish is practical and neat. The targetmaster consists of 2 parts : the powder trickler unit and the sensor unit. The third part is a conventional scale. That is not included in the price.
The producer of the targetmaster assumes that anyone reloading has already got a conventional beam scale. The funny thing is that the beam scale actually triggers the electronics. As the vibrating powdertrickler dumps the grains into the cup the long scalearm rises and interrupts the infra red beam of the sensor unit exactly at the right time. That unit then turns the trickler off. The good thing is that the beam scale will show the actual weight. This will work no matter what. And lets not forget very smart.
Allan Edwards invented this in the 80s when he often needed extreme small loads for his 32 S&W paladin match pistol.
He made prototype after prototype perfecting a targetmaster. Allan produces every component himself, even the plastic housing. Being used to working with simple electronics he developed some thing he can make himself with some extra possibilities.
The inventor did a fantastic job on the mechanical side and for this the inventor deserves our respect. The whole set looks very nice. A jackplug and cable connects the trickler to the sensor unit. The switches are heavy duty and every charge can be started with the red knob on top of the trickler. The height of the sensor arm can be adjusted and also the angle of the powdertrickler (this will effect the speed and accuracy). Four AA batteries supply the power for 250 loads. Do you want to see it in action ? Surf to www.targetmasteruk.com Be Impressed.
Re: Targetmaster trickler Dutch review translated.
Not sure you seen this 1066 so bumped it.
Re: Any Dutch speakers here?
Thanks Alpha, and please thank your Dutch friend - Not sure why I've not noticed this, I tend to check the new posts every day.
I think the Dutch review was mostly a rip-off of the German review, I don't think they actually saw a machine in the flesh. The Germans just bought one as a private sale, I was quite surprised when I got a rush of enquiries.
Just a couple of points to mention - The translation says the batteries last about 250 rounds, this should be around 2,500 rounds, also I have the main plastic housing made and screen printed for me, I vacuum form the plastic bases for the sensors myself.
I've now sold the Targetmasters to 18 different countries.
Thanks again
1066
I think the Dutch review was mostly a rip-off of the German review, I don't think they actually saw a machine in the flesh. The Germans just bought one as a private sale, I was quite surprised when I got a rush of enquiries.
Just a couple of points to mention - The translation says the batteries last about 250 rounds, this should be around 2,500 rounds, also I have the main plastic housing made and screen printed for me, I vacuum form the plastic bases for the sensors myself.
I've now sold the Targetmasters to 18 different countries.
Thanks again
1066
Who is online
Users browsing this forum: Google [Bot] and 8 guests