Cleaning it tonight so will take some pics.nickb834 wrote:Can we have a look at the .410 Marlin shotgun itself - my curiosity is peaked!
.410 Slugs
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
CDM5
- Posts: 547
- Joined: Fri Oct 26, 2012 6:41 pm
- Home club or Range: Tidworth RPC & Bisley
- Location: Wilts
- Contact:
Re: .410 Slugs
-
CDM5
- Posts: 547
- Joined: Fri Oct 26, 2012 6:41 pm
- Home club or Range: Tidworth RPC & Bisley
- Location: Wilts
- Contact:
Re: .410 Slugs
Cleaned the bore and there was a fair amount of unburnt powder in there. Also noticed it when cycling the action. Would I be better off using magnum primers with the 'Lil gun powder?
Who is online
Users browsing this forum: No registered users and 3 guests