No I don't think they are wrong it is your ignorant and bigoted interpretation of that in the context of bullet casting that is so spitefully wrong.ColinR wrote:Rather than misleading people about the dangers of lead ingestion, by whatever route, I suggest you read some of the vast amounts of medical literature relating to lead poisoning. Handling lead, including lead bullets, is specifically mentioned time and again. However, medical scientists clearly have it wrong as lead smelting and the fumes therefrom are also considered a source of poisoning.dromia wrote:For the record there are not any lead fumes at casting temperatures.
Just more uninformed ignorance spouted as fact by narrow minded shooters.
Subsonic for AW
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Subsonic for AW
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
ColinR
Re: Subsonic for AW
All molten lead gives off particles in vapourised form, admittedly the hotter it gets more vapour/fumes are formed.dromia wrote:No I don't think they are wrong it is your ignorant and bigoted interpretation of that in the context of bullet casting that is so spitefully wrong.ColinR wrote:Rather than misleading people about the dangers of lead ingestion, by whatever route, I suggest you read some of the vast amounts of medical literature relating to lead poisoning. Handling lead, including lead bullets, is specifically mentioned time and again. However, medical scientists clearly have it wrong as lead smelting and the fumes therefrom are also considered a source of poisoning.dromia wrote:For the record there are not any lead fumes at casting temperatures.
Just more uninformed ignorance spouted as fact by narrow minded shooters.
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Subsonic for AW
Aye but at bullet casting temperatures it is not sufficient to cause concern.
I have been casting all my life and have spent god knows how many hours, days, weeks standing over a lead pot casting and smelting and my lead levels are fine and always have been.
Like everything else simple, common sense practices around bullet casting make it quiet safe with no health threats.
It is uninformed apocryphal scaremongering like this that keeps shooting such a narrow, bland and conservative activity in this country.
I have been casting all my life and have spent god knows how many hours, days, weeks standing over a lead pot casting and smelting and my lead levels are fine and always have been.
Like everything else simple, common sense practices around bullet casting make it quiet safe with no health threats.
It is uninformed apocryphal scaremongering like this that keeps shooting such a narrow, bland and conservative activity in this country.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
ColinR
Re: Subsonic for AW
Please feel free to have the last word.dromia wrote:Aye but at bullet casting temperatures it is not sufficient to cause concern.
I have been casting all my life and have spent god knows how many hours, days, weeks standing over a lead pot casting and smelting and my lead levels are fine and always have been.
Like everything else simple, common sense practices around bullet casting make it quiet safe with no health threats.
It is uninformed apocryphal scaremongering like this that keeps shooting such a narrow, bland and conservative activity in this country.
-
tackb
Re: Subsonic for AW
I have 350kg of pure lead in my workshop , whats it worth at the moment?
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Subsonic for AW
Circa 7/- per lb.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
-
DOGGER2UK
Re: Subsonic for AW
He would have said 70p a Kg had he converted with the rest of us in 1968....but he did'ntdromia wrote:Circa 7/- per lb.
-
tackb
Re: Subsonic for AW
2.2lb in a kilo I think ?DOGGER2UK wrote:He would have said 70p a Kg had he converted with the rest of us in 1968....but he did'ntdromia wrote:Circa 7/- per lb.
-
DOGGER2UK
Re: Subsonic for AW
Ye Gods your correct....1968 was such a long time agotackb wrote:2.2lb in a kilo I think ?DOGGER2UK wrote:He would have said 70p a Kg had he converted with the rest of us in 1968....but he did'ntdromia wrote:Circa 7/- per lb.
Who is online
Users browsing this forum: No registered users and 0 guests