Motorised case preperation station
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Motorised case preperation station
Mine has sat next to the computer for two days still with the cellophane on it, not sure I can bring myself to read what I am missing
Re: Motorised case preperation station
You folks have too much time on your hands.......................
http://www.screwfix.com/p/ryobi-csd4107 ... iver/42261
http://www.screwfix.com/p/ryobi-csd4107 ... iver/42261
Re: Motorised case preperation station
Good point, I have a Screwfix catalogue to read as well!
-
Dangermouse
- Posts: 2326
- Joined: Sat Nov 06, 2010 7:29 pm
- Contact:
Re: Motorised case preparation station
You may want to read this recent review of motorised units for ideas
http://www.nxtbook.com/nxtbooks/nra/ssusa_201105/#/8
http://bulletin.accurateshooter.com/201 ... ports-usa/
DM
http://www.nxtbook.com/nxtbooks/nra/ssusa_201105/#/8
http://bulletin.accurateshooter.com/201 ... ports-usa/
DM
Without order and without a goal, six million people unarmed and unprovisioned, driving headlong. It was the beginning of the rout of civilisation, of the massacre of mankind.
Forever Autumn, War of the Worlds.
Forever Autumn, War of the Worlds.
Re: Motorised case preperation station
Mine has progressed quite well, it took a while to source some aluminium angle for the ends but that is all fitted now and I am working on my idea for fitting a neck cleaning attachment. I will post a picture up.
Re: Motorised case preperation station
This is where it is now, the chuck will take whatever I want to stick in it, I will be able to put an adapter in that *should* enable me to clean case necks which is what this project is all about really. Motor is 24vDC and will run of an existing PSU with speed controller.
Who is online
Users browsing this forum: No registered users and 0 guests