RAMSHOT POWDERS

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
meles meles
Posts: 6335
Joined: Mon Jun 06, 2011 8:17 pm
Home club or Range: HBSA
Location: Underground
Contact:

Re: RAMSHOT POWDERS

#11 Post by meles meles »

Alpha1 wrote: I was using Ramshot Magnum in my 6.5x55 but I have ran out.
Isn't Magnum a slow burning powder, ooman, better suited to big, hefty rounds, or is that something else we have got wrong ?
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun



Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Dannywayoflife

Re: RAMSHOT POWDERS

#12 Post by Dannywayoflife »

I've used loads if ramshot powders there great! Used wildbore, big game, magnum and tac.
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: RAMSHOT POWDERS

#13 Post by Alpha1 »

Burning rates. I used Ramshots suggested charge weights taken from there reloading data. Ill probably try Hunter next time in the 6.5.
http://www.accuratepowder.com/wp-conten ... _rates.pdf
Dannywayoflife

Re: RAMSHOT POWDERS

#14 Post by Dannywayoflife »

I'm going to start with magnum in my 243 using 115 DTAC's. Quick load predicts this will give the highest speed and still burn about 98% in a 18" barrel :) if that doesn't work hunter will be my next powder to try! :)
Post Reply

Who is online

Users browsing this forum: Google [Bot] and 4 guests