http://noebulletmolds.com/smf/index.php ... 440.0.html
NOE chamber length buttons.
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
NOE chamber length buttons.
Handy little doofurs, versions of which I've been using for a while, now available as a stock item from NOE.
http://noebulletmolds.com/smf/index.php ... 440.0.html
http://noebulletmolds.com/smf/index.php ... 440.0.html
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: NOE chamber length buttons.
Similar offerings are also available from Sinclair, and in a few more calibres:
http://www.sinclairintl.com/reloading-e ... 32925.aspx
Or you can make your own out of a case and bullet:
http://forum.accurateshooter.com/index. ... sg36470785
..
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: NOE chamber length buttons.
Yep. Sinclair do a version too at nearly twice the price of the NOE.
NOE aren't claiming it as new innovation just a good product at a good price.
I've used the inverted boolit method for years but these little doofurs are just easier to use for me at least and easier to get an accurate reading.
NOE aren't claiming it as new innovation just a good product at a good price.
I've used the inverted boolit method for years but these little doofurs are just easier to use for me at least and easier to get an accurate reading.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: NOE chamber length buttons.
Interesting.
Re: NOE chamber length buttons.
I have been using similar ever since I started shooting again, they were one of the first things I made. Alpha they are super easy to machine yourself however as NOE have very kindly supplied the dimensions it would be nice to return the favour and buy from them.
Re: NOE chamber length buttons.
I know exactly were you are coming from Ovenpaa I looked at the picture and thought wow and was ready to dive into my shed with the dimensions in my hand. Then I thought yeah NOE have gone to all this effort and the price is reasonable. So if you want one I recommend you purchase the NOE product.
And if you want the dogs danglies of a Cartridge over all length gauge then the Shooting Sheds are about the best you can get.
I am getting up to speed now with my machining skills I have a very good teacher I have made/copied all sorts of bits and pieces to understand how people turn a lump of metal into a finished product. I make stuff for my self any thing I make is not for sale. Its a hobby I enjoy having a play. I also understand that to some people its the way they make there living. I'm not about to do any thing to jeopardise that or try to fob off one of my amateur jobbies as the pukka product.
I'm sure I could make one of the NOE things in a heart beat but I aint going to.
And if you want the dogs danglies of a Cartridge over all length gauge then the Shooting Sheds are about the best you can get.
I am getting up to speed now with my machining skills I have a very good teacher I have made/copied all sorts of bits and pieces to understand how people turn a lump of metal into a finished product. I make stuff for my self any thing I make is not for sale. Its a hobby I enjoy having a play. I also understand that to some people its the way they make there living. I'm not about to do any thing to jeopardise that or try to fob off one of my amateur jobbies as the pukka product.
I'm sure I could make one of the NOE things in a heart beat but I aint going to.
Re: NOE chamber length buttons.
I had a look on the web site. What are NOE like to deal with I guess they ship molds to the UK if so how long do you wait for them to arrive are there any issues with ordering boolit molds from them.
Who is online
Users browsing this forum: No registered users and 5 guests