.223 cal data please

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
forbie

Re: .223 cal data please

#21 Post by forbie »

Up the stakes on N140 26 grns SMK 69 grn Seated long, LOADED IN SINGLE ROUNDS (COL don't fit the mag)
Attachments
Group from the above load at 100 yds<br />20&quot; SGC speedmaster
Group from the above load at 100 yds
20" SGC speedmaster
lapua338
Posts: 521
Joined: Sat Nov 06, 2010 9:23 pm
Location: Surrey
Contact:

Re: .223 cal data please

#22 Post by lapua338 »

He's gonna' need a 1:9 twist rate to shoot a 69 grain bullet.

There's plenty of data available from the component manufacturers.

The VihtaVuori Reloading Guide for Centerfire Cartridges can be downloaded free from the website.
Mr_Logic

Re: .223 cal data please

#23 Post by Mr_Logic »

69gr SMK != hot fox load!
Post Reply

Who is online

Users browsing this forum: No registered users and 8 guests