Shopping List for NATO / Russian Set-up?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
HALODIN
Re: Shopping List for NATO / Russian Set-up?
The problem is, without experience which is something I don't have a lot of, unless I take `known inaccuracies` out of the process I can't eliminate other areas, which incidentally I'm looking at with a fine toothcomb. If you build in inaccuracies from day 1, how will you ever develop the best load for your rifle? Measuring the powder to the kernel appears to have improved my game.
dromia wrote:Then I would look at some other parts of your reloading process.
I have never noticed a difference out to 1000 yrds of 1/10 of a grain +/- in a 40+ gn load, but then no doubt you are a better shot than I.
Who is online
Users browsing this forum: No registered users and 7 guests