Reloading 22-250
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Reloading 22-250
Do try to replicate factory ammunition or build for the rifle, and if so will the magazine take full length rounds (within 5/10 thou?)
-
dodgyrog
- Posts: 4097
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: Reloading 22-250
Done that with a Norma round that works in my mates Sako.
Ha to guess a powder from the weight and found a similar charge (and burning rate) of Viht.
I'm thinking of trying the Hodgdon that was mentioned.
Ha to guess a powder from the weight and found a similar charge (and burning rate) of Viht.
I'm thinking of trying the Hodgdon that was mentioned.
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
Re: Reloading 22-250
dodgyrog,
Maybe this article will assist you http://www.accurateshooter.com/featured/22-250.
I've always found the technical articles on this site very educational and some of them very useful.
Maybe this article will assist you http://www.accurateshooter.com/featured/22-250.
I've always found the technical articles on this site very educational and some of them very useful.
-
bnz41
- Posts: 1990
- Joined: Sat Nov 06, 2010 4:20 pm
- Home club or Range: NRA Bisley
- Location: Essex
- Contact:
Re: Reloading 22-250
Having looked at the article, that lapua338 posted the link to, I decided to check the twist rate in my CZ550, it measured 1 in 14 so the 52gr and 55gr match kings I use seem to be well suited. Tested at 200yrds at last Saturday 20 shots in a 2" group, and thats without really fine tuning the scope. Well happy..
Who is online
Users browsing this forum: Bing [Bot] and 1 guest