Hornady one shot spray case lube
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
zanes
Re: Hornady one shot spray case lube
I always found the one-shot stuff to be s***. Was I missing a trick with it somewhere (moved to redding bio-lube and never looked back)? Was FL sizing .308.
-
Steve E
Re: Hornady one shot spray case lube
I've full length sized many thousands of .308 & .303 using Lyman, Hornady and Frankfort one shot lubes. Never had a problem. You may have being using the wrong technique.zanes wrote:I always found the one-shot stuff to be s***. Was I missing a trick with it somewhere (moved to redding bio-lube and never looked back)? Was FL sizing .308.
Place up to 100 cases in an old ice cream container (flavour irrelevant), spray lube on top, give container a good shake and job is done. Just done 500 this afternoon with no issues.
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Hornady one shot spray case lube
Indeed, pop the cases into a zip lock plastic bag, spray, shake and spray again then mix around and let dry for 5 - 15 mins, with the RCBS perfectly lubed cases every time 
There's room for all Gods creatures, next to the mash and gravy :)
Who is online
Users browsing this forum: No registered users and 7 guests