.308 Down loads

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
User avatar
old_n07
Posts: 62
Joined: Thu Nov 07, 2013 9:28 am
Home club or Range: FCSA \ Uttoxeter Rifle Club
Location: Stoke-on-Trent
Contact:
Contact old_n07

.308 Down loads

#1 Post by old_n07 »

Just wondering if anyone has any input on down loading for .308 such as any load data. recommended powder, bullets or tips and tricks.

The load in question would be for a 700 SP Varmint on a 25m range, a subsonic load could be quite interesting as one of the main reasons behind this is for noise issues.

TIA

Neil
Top
User avatar
Charlotte the flyer
Posts: 1155
Joined: Sat Oct 20, 2012 11:02 am
Home club or Range: Classified
Location: Staffs
Contact:
Contact Charlotte the flyer

Re: .308 Down loads

#2 Post by Charlotte the flyer »

Apparently it scares the cows! :squirrel: tesnews

We also need information on downloading 7.62R to shut those nasty M44s up. troutslapping
The above post probably contains sarcasm or some other form of attempted wit, please don't take it to heart.
Top
Dave 101

Re: .308 Down loads

#3 Post by Dave 101 »

The noise issue wont be resolved by downloads ., I have just been trying out some 7.62 with cast lead bullets using 9 gns of unique . fairly consistent but they go with a crack .

Dave
Top
User avatar
jjvc
Posts: 590
Joined: Sat Nov 06, 2010 6:28 pm
Location: Durham
Contact:
Contact jjvc

Re: .308 Down loads

#4 Post by jjvc »

Lee C309-113F cast lead bullet sized .309 over 4g Vihtavuori N310 works for me.

Joe
Top
User avatar
Sandgroper
Full-Bore UK Supporter
Posts: 4735
Joined: Sat Nov 06, 2010 3:45 pm
Location: Stanley, Falkland Islands
Contact:
Contact Sandgroper

Re: .308 Down loads

#5 Post by Sandgroper »

Hodgdon data for subsonic loads is 8gn of Titegroup or Clays with 168gn bullet - worked for me and my Ishapore.


Also, 10 to 14 grains of Trailboss with a 150gn bullet will get you between 1170-1400fps.
“The standard you walk past is the standard you accept.”

Lieutenant General David Morrison

I plink, therefore I shoot.
Top
Mail2pete

Re: .308 Down loads

#6 Post by Mail2pete »

Have a look at TrailBoss powder. http://www.hodgdon.com/PDF/Trail%20Boss ... %20R&P.pdf
Top
User avatar
meles meles
Posts: 6335
Joined: Mon Jun 06, 2011 8:17 pm
Home club or Range: HBSA
Location: Underground
Contact:
Contact meles meles

Re: .308 Down loads

#7 Post by meles meles »

Would eider work ?
Badger
CEO (Chief Excavatin' Officer)
Badger Korporashun



Quidquid latine dictum sit altum viditur.
"Quelle style, so British"
Top
User avatar
Sandgroper
Full-Bore UK Supporter
Posts: 4735
Joined: Sat Nov 06, 2010 3:45 pm
Location: Stanley, Falkland Islands
Contact:
Contact Sandgroper

Re: .308 Down loads

#8 Post by Sandgroper »

Mail2pete wrote:Have a look at TrailBoss powder. http://www.hodgdon.com/PDF/Trail%20Boss ... %20R&P.pdf
What I said! :lol:
“The standard you walk past is the standard you accept.”

Lieutenant General David Morrison

I plink, therefore I shoot.
Top
User avatar
old_n07
Posts: 62
Joined: Thu Nov 07, 2013 9:28 am
Home club or Range: FCSA \ Uttoxeter Rifle Club
Location: Stoke-on-Trent
Contact:
Contact old_n07

Re: .308 Down loads

#9 Post by old_n07 »

Cheers for the suggestions :goodjob:

If this clip is what can be achieved with subsonic ammo and a moderator it is worth looking at

http://www.youtube.com/embed/B1WUOgaWmtM



Anything to keep the cows happy :roll:
Top
User avatar
old_n07
Posts: 62
Joined: Thu Nov 07, 2013 9:28 am
Home club or Range: FCSA \ Uttoxeter Rifle Club
Location: Stoke-on-Trent
Contact:
Contact old_n07

Re: .308 Down loads

#10 Post by old_n07 »

Looks like 10gr of trailboss under a 175gr bullet will give a subsonic round according to the chrono test here

http://www.youtube.com/watch?v=pqdIGNU5rbU
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 4 guests