Sounds like the sort of set up i'll be doing soon,looking to cast a few hundred shotgun slug a year.Having looked at the price of the Lyman mold i'll be sticking to Lee.dromia wrote:good boolits can be cast from a mould, iron pot, dipper and a camping stove.
A day at the pot!
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
mr smith
- Posts: 800
- Joined: Wed Mar 02, 2011 2:10 pm
- Home club or Range: Dundee Rifle and Pistol Club
- Contact:
Re: A day at the pot!
-
dodgyrog
- Posts: 4103
- Joined: Wed Jan 05, 2011 11:17 pm
- Home club or Range: Three Counties Sporting Club & Gardners Guns
- Location: Consett, County Durham
- Contact:
Re: A day at the pot!
+1 I use welders glovesbnz41 wrote:Good job.
But where are your safety glasses and gloves
Purveyor of fine cast boolits.
All round good guy and VERY grumpy old man.
All round good guy and VERY grumpy old man.
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: A day at the pot!
Wise move Roger, considering your clumsiness. :goodjob: 
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: A day at the pot!
I'll bring "my" pot along next week, that'll double the production pile. 120g, 6.5 Kurtz this time for my soon to arrive M96.
Who is online
Users browsing this forum: No registered users and 5 guests