Where to get reloading components? (Basingstoke based)

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Post Reply
Message
Author
Steve E

Re: Where to get reloading components? (Basingstoke based)

#11 Post by Steve E »

thesquiff wrote:Well aware of Fultons. Also well aware of their prices!
Fultons are often no more expensive than any other gunshop when it comes to selling components and reloading equipment. Some times they can be quite a bit cheaper, especially as they usually have stock of second hand reloading equipment. I got a second hand RCBS sidewinder case tumbler from them for £60 that works perfectly, retail new in excess of £230.

Also the NRA Range office sell bullets, cases, primers powders and Lee Reloading equipment.
Top
Post Reply

Return to “Reloading and Ammunition”

Who is online

Users browsing this forum: No registered users and 5 guests