Where to get reloading components? (Basingstoke based)
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Where to get reloading components? (Basingstoke based)
Hi all,
Does anyone have a recommendation for a good stockest of .308 bullet heads (Lapua Scenar or Sierra Matchking) and primers?
I'm Basingstoke based, currently commuting to Leatherhead so anywhere in north Hampshire or Surrey would be convenient.
Thanks in advance.
Does anyone have a recommendation for a good stockest of .308 bullet heads (Lapua Scenar or Sierra Matchking) and primers?
I'm Basingstoke based, currently commuting to Leatherhead so anywhere in north Hampshire or Surrey would be convenient.
Thanks in advance.
Re: Where to get reloading components? (Basingstoke based)
Havent a clue about whats what in reloading, but I called into GT Shooting in Coulsdon the other weekend and he had kit and components on his shelf. Spent a couple of hours in there chatting, and admiring the various stuff he sells, had a reasonable range of LBRs in stock. Probably worth phoning rather than email
http://www.gtshooting.co.uk/
http://www.gtshooting.co.uk/
-
- Posts: 1424
- Joined: Tue Feb 22, 2011 12:43 pm
- Home club or Range: NRA Bisley
- Location: Bisley
- Contact:
Re: Where to get reloading components? (Basingstoke based)
I have '000s of Sierra 190s at the NRA.
Iain
Iain
Re: Where to get reloading components? (Basingstoke based)
Try the Shooting Shed, very competitive prices and friendly service.
-
- Full-Bore UK Supporter
- Posts: 800
- Joined: Sat Apr 07, 2012 8:38 pm
- Home club or Range: Weybridge
- Location: Bisley
- Contact:
Re: Where to get reloading components? (Basingstoke based)
Andy Allwood is only 1/2 hour from your place, he's well stocked with reloading components etc
http://www.tfsa.co.uk/
Also Ian at ITL is just of J11 M25 and has loads of stuff.
www.itlshootingsupplies.co.uk/
http://www.tfsa.co.uk/
Also Ian at ITL is just of J11 M25 and has loads of stuff.
www.itlshootingsupplies.co.uk/
Last edited by DanTheMan on Sun Nov 03, 2013 7:14 pm, edited 1 time in total.
- kennyc
- Posts: 2340
- Joined: Wed Jul 20, 2011 11:21 pm
- Home club or Range: hunters NRPC
- Location: Reading West Berks
- Contact:
Re: Where to get reloading components? (Basingstoke based)
Andy Allwood or ITL Shooting
Re: Where to get reloading components? (Basingstoke based)
Thanks for all the replies - never knew there were that many suppliers nearby. I wonder if a trade directory on this forum could be a useful addition?
- mag41uk
- Posts: 1847
- Joined: Sat Oct 13, 2012 3:50 pm
- Home club or Range: Aldershot R & P Club
- Location: Reading
- Contact:
Re: Where to get reloading components? (Basingstoke based)
If you get stuck I can spare some lapuas in 155 and 167 gn.
Also have a box of 500 SMK 2156 and maybe some 2155`s.
Also have plenty of large rifle primers.
I am in Reading just off A329M.
Tony
Also have a box of 500 SMK 2156 and maybe some 2155`s.
Also have plenty of large rifle primers.
I am in Reading just off A329M.
Tony
Re: Where to get reloading components? (Basingstoke based)
Between Basingstoke and Leatherhead is a place called Bisley. Fultons of Bisley may have what you need and if not can order it. When I was las there that had Lee loading stuff, bullets, primers, powder. They got an arrestor block for my air rifle that no other RFD could obtain. Plus it's a nice shop to visit and the staff are very knowledgeable.
Re: Where to get reloading components? (Basingstoke based)
Well aware of Fultons. Also well aware of their prices!
Who is online
Users browsing this forum: Google [Bot] and 5 guests