Broken Sinclair Arbor press
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Broken Sinclair Arbor press
On the Lee Cast Classic the top section of ram can be removed and replaced with an insert, I do not thread them, instead they are held in place with an O Ring, the upper section is simply a threaded section with a lock nut. I built 2-3 ages ago so the drawing will be on paper as opposed to CAD however I will have a look and see if I can find something on them. I made everything out of polished stainless for the last one.
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Broken Sinclair Arbor press
I would also contact the company you bought the press from, if it wasn't from Sinclair direct, and seek a replacement or refund as it it obviously not fit for purpose.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: Broken Sinclair Arbor press
Yes, the supplier should be your first point of contact.
-
dromia
- Site Admin
- Posts: 20226
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Broken Sinclair Arbor press
You never know you may have a grey squirrel import. 
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: Broken Sinclair Arbor press
The boys have told me they can make a replacement probably on Monday so I should be Ok. I think I bought it from reloading solutions
Re: Broken Sinclair Arbor press
I have been assured that the new part will be of a much better quality than the original and they chastised me for buying the Sinclair jobby apparently they could of made me one that would of been far superior to the Sinclair offering. Now they tell me. :cool2:
-
saddler
Re: Broken Sinclair Arbor press
If I send them the wool can they knit one for me?Alpha1 wrote:I have been assured that the new part will be of a much better quality than the original and they chastised me for buying the Sinclair jobby apparently they could of made me one that would of been far superior to the Sinclair offering. Now they tell me. :cool2:
Who is online
Users browsing this forum: No registered users and 10 guests