Winchester trapper 94 Angle eject cast boolit question.

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#41 Post by Alpha1 »

I have got a scope rail for the mas :55: :lol:
User avatar
Sandgroper
Full-Bore UK Supporter
Posts: 4735
Joined: Sat Nov 06, 2010 3:45 pm
Location: Stanley, Falkland Islands
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#42 Post by Sandgroper »

Alpha1 wrote:I have got a scope rail for the mas :55: :lol:
So what's the difference between putting scope on the MAS and not the Winchester?
“The standard you walk past is the standard you accept.”

Lieutenant General David Morrison

I plink, therefore I shoot.
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#43 Post by Alpha1 »

I can not believe you asked that question have you seen a mas36. You need to find another hobby my friend. kukkuk
User avatar
Sandgroper
Full-Bore UK Supporter
Posts: 4735
Joined: Sat Nov 06, 2010 3:45 pm
Location: Stanley, Falkland Islands
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#44 Post by Sandgroper »

Alpha1 wrote:I can not believe you asked that question have you seen a mas36. You need to find another hobby my friend. kukkuk
Yes I have and the question still stands, what's the difference?

If anything, in my eyes putting a scope on the MAS is more disturbing as it wasn't meant to have a scope mounted on it, whereas the Winchester is designed to have a scope fitted.
“The standard you walk past is the standard you accept.”

Lieutenant General David Morrison

I plink, therefore I shoot.
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#45 Post by dromia »

Grant you have to bow to the genius of Alpha1.

The MAS is accepted the world over as the ugliest proper rifle ever made (black placcy things don't count as they are just ugly). But Alpha1 has actually managed to make the MAS even uglier, stand back in awe I say, such perverse talent comes but once in an age.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Sandgroper
Full-Bore UK Supporter
Posts: 4735
Joined: Sat Nov 06, 2010 3:45 pm
Location: Stanley, Falkland Islands
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#46 Post by Sandgroper »

dromia wrote:Grant you have to bow to the genius of Alpha1.

The MAS is accepted the world over as the ugliest proper rifle ever made (black placcy things don't count as they are just ugly). But Alpha1 has actually managed to make the MAS even uglier, stand back in awe I say, such perverse talent comes but once in an age.


Image
“The standard you walk past is the standard you accept.”

Lieutenant General David Morrison

I plink, therefore I shoot.
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#47 Post by dromia »

Good man Grant, Dave is truly special.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#48 Post by Alpha1 »

I wont be putting a scope on either of them. I said I had a scope rail did not say I was going to fit it I am hoping to sell the rail it must be worth thousands if its for a mas36.
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#49 Post by dromia »

Oh Dave you do know how to tease and disappoint.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#50 Post by Alpha1 »

mas36 scope mount must be worth thousands. :55:
mas 002.JPG
mas 006.JPG
Post Reply

Who is online

Users browsing this forum: Bing [Bot] and 0 guests