Winchester trapper 94 Angle eject cast boolit question.

This section is for reloading and ammunition only, all loads found in here are used strictly at your own risk, if in doubt ask again.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should treated as suspect and not used.

Moderator: dromia

Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.

Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Message
Author
Dougan

Re: Winchester trapper 94 Angle eject cast boolit question.

#31 Post by Dougan »

Lol - I think we're getting mixed up here - By original, I did mean a Winny 100+ years old, in which case it would be a crime to put a scope on it.

Thinking about it (having read your comments) I don't think you should put a scope on it if you're just enjoying shooting it at your club (I only put a scope on my Marlin to compete at the Phoenix)...

...if you still want to improve your accuracy there may be other options - What sort of sights do you currently have, and what point of aim are you taking?...trying to line up a black blade in a black 'V' sight against a black target is difficult enough, but more so if your eyes are going...

...there's loads of sight options available for lever action rifles - you can get front and rear sights with luminous dots on them, or try a rear peep-sight...or adjust your point of aim; for example if you're shooting at a standard round black target you can set the sights up (would need an adjustable rear sight) so that you're shooting into the white below the black (pistol style)...

...it might be worth (and fun) trying these options first, as it's obvious you really don't want a scope on it.
User avatar
mag41uk
Posts: 1847
Joined: Sat Oct 13, 2012 3:50 pm
Home club or Range: Aldershot R & P Club
Location: Reading
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#32 Post by mag41uk »

You shouldnt feel bad about putting a scope on a relatively new underlever.
Remember what they were built for,slotting deer in the woods at short range!
Its a truck gun.
Tony
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#33 Post by Alpha1 »

Maybe you are right I will play with it a bit more and try and tighten the groups up before deciding what's next.
I have a Williams aperture sight on it at present its adjustable for windage and elevation. The problem is the front sight is just a fuzzy line and it just blends in with the black. I might try setting it up for 6 o clock hold. Its annoying for me because before my right eye went t-ts up I used to be able to put them all in the black at 25 yards standing unsupported. Now I am lucky if I get one in the black.
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#34 Post by dromia »

If you ignore the rear sight and the target can you focus on the fore sight?
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#35 Post by Alpha1 »

If you ignore the rear sight and the target can you focus on the fore sight?
I don't know I will have to give it a go and see. Part of the problem is the implant(lens) in my right eye is only for distance vision.
The sight in my right eye up close is poor all though I do have a pair off glasses that help.(Actually the eye is not that clever at distance either) Well I did have a pair except I put them down in my workshop and I have not been able to find them again. I also now have a pair of glasses that my optician has prescribed after talking to him about the shooting problem. I will try them out next week at the club and see if they make a difference.
Dougan

Re: Winchester trapper 94 Angle eject cast boolit question.

#36 Post by Dougan »

I started wearing reading glasses a few months ago; it took me ages to work out my short range vision was going...was taking me forever to get through a book...but fortunately my long range vision is still OK for the time being...

...It played havoc with my TR shooting this year - I used to use a very small front and rear aperture, but just couldn't focus properly any more...I ended up with much larger apertures, and with the rear sight further away to compensate...

...I only shoot one .22 TR comp a year now - last year I shot a pretty good 10-bull target, but this year I couldn't see a bloody thing down the 2.7 forsight i'd used the year before...
User avatar
Alpha1
Posts: 8627
Joined: Fri Nov 12, 2010 8:27 pm
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#37 Post by Alpha1 »

I think my days with apertures are over. Most of the stuff I have acquired over the years have battle sights. Maybe I should just clear the lot out and buy scoped up stuff. We will see.
User avatar
jjvc
Posts: 590
Joined: Sat Nov 06, 2010 6:28 pm
Location: Durham
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#38 Post by jjvc »

I'll have first dibbs on the MAS if you start clearing out Dave.

Joe ;)
User avatar
dromia
Site Admin
Posts: 20226
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#39 Post by dromia »

Too late. :55:
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
jjvc
Posts: 590
Joined: Sat Nov 06, 2010 6:28 pm
Location: Durham
Contact:

Re: Winchester trapper 94 Angle eject cast boolit question.

#40 Post by jjvc »

signfunnypost
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests