Component prices - taking the p***!
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Component prices - taking the p***!
Don't forget to add the Italian version of VAT at 20% to that as well. I got 10K PMC/Murom large rifle primers for £28/1000 about 3 weeks ago, tried them out today against loads with Magtech and CCI and found no difference in the grouping at all.
There's room for all Gods creatures, next to the mash and gravy :)
Re: Component prices - taking the p***!
Yep and I'm still looking for Titegroup!!
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
-
Blu
Re: Component prices - taking the p***!
SimG, Here you go mate but you'll need to come and get it tongueout
Blu 
Re: Component prices - taking the p***!
:lol: :lol: :lol: :lol: :lol: :lol: :lol: 
:cool2:
:cool2:In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Component prices - taking the p***!
Sim, can I ask what you're wanting the TiteGroup for?.
I was using it for 308 Subsonic but switched to Viht N310, still using it for the 44magnum but when I run out will switch to Nobel GM3 which works out even cheaper
I was using it for 308 Subsonic but switched to Viht N310, still using it for the 44magnum but when I run out will switch to Nobel GM3 which works out even cheaper
There's room for all Gods creatures, next to the mash and gravy :)
Re: Component prices - taking the p***!
Hi Jeff. Using it in .25-20, .32-20 and .32 H&R.
I've tried plenty of other stuff in these, but Titegroup seems to work perfectly.
I've tried plenty of other stuff in these, but Titegroup seems to work perfectly.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
-
Blu
Re: Component prices - taking the p***!
Now ain't that always the way, the stuff that works great you can never get or have a hard time finding :cool2:Sim G wrote:Hi Jeff. Using it in .25-20, .32-20 and .32 H&R.
I've tried plenty of other stuff in these, but Titegroup seems to work perfectly.
Blu
-
DanTheMan
- Full-Bore UK Supporter
- Posts: 800
- Joined: Sat Apr 07, 2012 8:38 pm
- Home club or Range: Weybridge
- Location: Bisley
- Contact:
Re: Component prices - taking the p***!
Excellent link thanksandy h wrote:You can get primers by post from Siarm ,they work out at 22-50 per thousand plus shipping from Europe about 15 Euro's.
http://www.siarm.com/product_info.php?c ... cts_id=954
http://www.siarm.com/index.php?cPath=2_ ... 238b195758
-
phaedra1106
- Posts: 3429
- Joined: Wed Feb 08, 2012 9:37 pm
- Location: Just outside Sacriston (the nice bit!)
- Contact:
Re: Component prices - taking the p***!
If you're ever in The Netherlands Bold Action are cheaper for Gynex primers, http://www.bold-action.com/index.php/Sl ... sting.html
There's room for all Gods creatures, next to the mash and gravy :)
-
Scotsgun
Re: Component prices - taking the p***!
Cheers guys,
I knew he was taking the p*** but he seemed genuinely surprised when I challenged his price and it's the first time I've ever needed or bought them. I am sure it'll be the last time I'll spend money there which is a shame as I've spent alot there recently.
I knew he was taking the p*** but he seemed genuinely surprised when I challenged his price and it's the first time I've ever needed or bought them. I am sure it'll be the last time I'll spend money there which is a shame as I've spent alot there recently.
Who is online
Users browsing this forum: Majestic-12 [Bot] and 4 guests