Hello again all,
Does anyone know of a source of .452 cast heads with a crimp grove (i.e. intended for 45 Colt).
Various folks in the US do them, but I can only find .454 Colt heads in the UK.
Any pointers appreciated.
.452 Heads
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
saddler
Re: .452 Heads
I think if you call them by the correct name it'd be a good start = BULLETSGRSporth1 wrote:Any pointers appreciated.
As to the caliber, I use 45 Colt bullets, cast from an Ideal BULLET mold (they don't sell or make HEAD molds)
The mold code number is 454 424 - the newer Lyman made mold has the code 452 424
IF you were bothered by the 2 thou difference, you could always run the 454 dia bullets through a 452 sizer
What dia did your barrel slug at?
-
waterford103
- Posts: 1076
- Joined: Fri Feb 01, 2013 3:34 pm
- Home club or Range: Aberdeen FBGC
- Location: North-East Scotland
- Contact:
Re: .452 Heads
BULLETS BULLETS BULLETS !!!!!!!!!!!GRSporth1 wrote:Hello again all,
Does anyone know of a source of .452 cast heads with a crimp grove (i.e. intended for 45 Colt).
Various folks in the US do them, but I can only find .454 Colt heads in the UK.
Any pointers appreciated.
"This year will go down in history. For the first time, a civilized nation has full gun registration. Our streets will be safer, our police more efficient, and the world will follow our lead into the future!"
Adolph Hitler – 1933
Adolph Hitler – 1933
-
GRSporth1
Re: .452 Heads
.451 and yes, I have fired .454 heads (and even some of these bullet things you mentionsaddler wrote: What dia did your barrel slug at?
) through it. Tad too much leading for my taste.Know of any good sources?
-
dromia
- Site Admin
- Posts: 20225
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: .452 Heads
As a user of the word boolit to describe cast and swaged boolits as opposed to jacketed I don't really think it is a technical term.
The word was invented by Ken Caldwell who set up the Cast Boolits forum after the demise of the old Shooters.com and Aimo forums.
Since then the word has found some currency amongst cast bullet aficionados, dodgyrog has even pinched the word for his commercial title, some others hate it and refuse to use it. It was never meant to be anything other than a lighthearted way of giving the new forum an identity, as I say I use the word to describe cast projectiles but am equally happy to have them called cast bullets as that is what they are however with the rapidity that language is evolving who knows perhaps it will find its way into the common lexicon but I won't be loosing sleep on it if it doesn't.
Bullets heads however is something I know nothing about, don't know what they are and I am therefore unwilling to contribute to threads on the subject.
The word was invented by Ken Caldwell who set up the Cast Boolits forum after the demise of the old Shooters.com and Aimo forums.
Since then the word has found some currency amongst cast bullet aficionados, dodgyrog has even pinched the word for his commercial title, some others hate it and refuse to use it. It was never meant to be anything other than a lighthearted way of giving the new forum an identity, as I say I use the word to describe cast projectiles but am equally happy to have them called cast bullets as that is what they are however with the rapidity that language is evolving who knows perhaps it will find its way into the common lexicon but I won't be loosing sleep on it if it doesn't.
Bullets heads however is something I know nothing about, don't know what they are and I am therefore unwilling to contribute to threads on the subject.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: .452 Heads
dromia wrote: Bullets heads however is something I know nothing about, don't know what they are and I am therefore unwilling to contribute to threads on the subject.
:lol: :lol: :lol: clapclap
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
-
saddler
Re: .452 Heads
Yes, LOTS of good sources, but only for bullets...so unable to assist with your search for "heads"GRSporth1 wrote:saddler wrote:Know of any good sources?
....have you tried asking a sailor?
Who is online
Users browsing this forum: No registered users and 5 guests