Carl Gutav 6.5x55 cast load data please.
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Carl Gutav 6.5x55 cast load data please.
Any body got any advice on boolit weight powder for the Swede for a 25yard cast load.
-
saddler
Re: Carl Gutav 6.5x55 cast load data please.
Dromia will be the man to tell you
Powder - about 4 grains of any pistol powder, such as N310
Powder - about 4 grains of any pistol powder, such as N310
-
dromia
- Site Admin
- Posts: 20225
- Joined: Sat Nov 06, 2010 4:57 am
- Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. Teesdale Pistol and Rifle club.
- Location: Sutherland and Co Durham
- Contact:
Re: Carl Gutav 6.5x55 cast load data please.
As has been said here often, 4 gns of any fast pistol powder like Vihtavuori N310 under the standard 140 gn Lyman 266465 works well.
I prefer a slightly lighter boolit mainly shooting a 120gn version of the 266469 the 266455 125 gn loverin works well too if you have the mould.
I prefer a slightly lighter boolit mainly shooting a 120gn version of the 266469 the 266455 125 gn loverin works well too if you have the mould.
Come on Bambi get some
Imperial Good Metric Bad
Analogue Good Digital Bad
Fecking stones
Real farmers don't need subsidies
Cow's farts matter!
For fine firearms and requisites visit
http://www.pukkabundhooks.com/
Re: Carl Gutav 6.5x55 cast load data please.
Right off we go then. 4grains it is.
Re: Carl Gutav 6.5x55 cast load data please.
The only mould I have is the Lyman 140grain 2660469. I will give that a go using wheel weights or I might just buy some boolits off some one I don't have a lot of time for casting these days.
Who is online
Users browsing this forum: No registered users and 2 guests