7.62X39 HEAVY BULLET
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
7.62X39 HEAVY BULLET
I have given up trying to buy full metal jacket bullets in 123/125 grain .311 for this rifle.
Can any body tell me if it will work with a 170grain or a 174grain flat base .311 bullet. Or even a boat tail 155grain Amax perhaps.
Its a Australian arms thingy in 7.62x39. Thought one of you guys with a ballistic program might be able to run the numbers.
Can any body tell me if it will work with a 170grain or a 174grain flat base .311 bullet. Or even a boat tail 155grain Amax perhaps.
Its a Australian arms thingy in 7.62x39. Thought one of you guys with a ballistic program might be able to run the numbers.
Re: 7.62X39 HEAVY BULLET
Why have you given up trying to buy the lighter .311 FMJ's?
- Sandgroper
- Full-Bore UK Supporter
- Posts: 4735
- Joined: Sat Nov 06, 2010 3:45 pm
- Location: Stanley, Falkland Islands
- Contact:
Re: 7.62X39 HEAVY BULLET
So far, 150gn bullet is the heaviest load data I've found.
I believe the Russians had special purpose 190gn subsonic ammunition in 7.62x39 - so it should be possible.
HTH
I believe the Russians had special purpose 190gn subsonic ammunition in 7.62x39 - so it should be possible.
HTH
Last edited by Sandgroper on Wed Apr 03, 2013 8:15 pm, edited 1 time in total.
“The standard you walk past is the standard you accept.”
Lieutenant General David Morrison
I plink, therefore I shoot.
Lieutenant General David Morrison
I plink, therefore I shoot.
Re: 7.62X39 HEAVY BULLET
There's quite a bit of load data about for this cal with heavy, 160 to 170gn cast bullets.
What's the rifle like? I've always fancied one but rarely see them for sale....
What's the rifle like? I've always fancied one but rarely see them for sale....
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Re: 7.62X39 HEAVY BULLET
I can not find any body who sells them. Last time I tried to buy them I phoned Kranks who assured me he stocked them I drove 2 hours to his shop when I arrived he had one box with 90 bullets in. No body in my neck of the woods stocks them. I have been shooting cast boolits through it but I still want to have a play with full metal jackets but I have not been able to get any so I decided to try a heavier bullet in .311/.312 because I all ready have them on the shelf for the .303.Why have you given up trying to buy the lighter .311 FMJ's?
Re: 7.62X39 HEAVY BULLET
I shoot it with a 165grain cast boolit with good results at 100yds. Mine is a cracking rifle it shoots really well and it was cheap as chips to buy. Great fun I have had mine a while. You don't see many of them about.There's quite a bit of load data about for this cal with heavy, 160 to 170gn cast bullets.
What's the rifle like? I've always fancied one but rarely see them for sale....
- Sandgroper
- Full-Bore UK Supporter
- Posts: 4735
- Joined: Sat Nov 06, 2010 3:45 pm
- Location: Stanley, Falkland Islands
- Contact:
Re: 7.62X39 HEAVY BULLET
What about about 32 cal pistol bullets? Don't know about availability and you'd have be careful as the diameter can vary from .311 to .313 - just a thought.
“The standard you walk past is the standard you accept.”
Lieutenant General David Morrison
I plink, therefore I shoot.
Lieutenant General David Morrison
I plink, therefore I shoot.
Re: 7.62X39 HEAVY BULLET
S&B do a 123 grain .311 - I did have a look for some here however all I found was half of one... There were dozens of boxes of the things on the shelf when I brought mine however that was a couple of years ago.
Re: 7.62X39 HEAVY BULLET
I have given up trying to find 123grain full metal jacket in .311
Re: 7.62X39 HEAVY BULLET
I will ask next time I am over that way.
Who is online
Users browsing this forum: No registered users and 2 guests