Just been doing some more reading on getting COL and lands gap sorted, and think a purchase of a comparator may be a good idea.
What are my options and is this a good idea or is there another way of doing it?
Comparator?
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Comparator?
"Death is nature's way of telling you to slow down." - Dick Sharples
-
20series
- Posts: 4852
- Joined: Mon Nov 08, 2010 10:42 am
- Home club or Range: Oundle R&PC
- Location: Chelveston, Northants
- Contact:
Re: Comparator?
just buy a comparator mate, it makes life a lot easier and your OAL measurements accurate.
I got mine from reloading solutions
Alan
I got mine from reloading solutions
Alan
A common mistake that people make when trying to design something completely foolproof is to underestimate the ingenuity of complete fools!!
Douglas Adams, 1952-2001 RIP
Douglas Adams, 1952-2001 RIP
Re: Comparator?
Thats where I've been looking. got some prices for other stuff to...
"Death is nature's way of telling you to slow down." - Dick Sharples
Re: Comparator?
If you have the Stony Point holder I can soon make you a comparator insert for whatever calibre you need, I have made a few for myself 
Re: Comparator?
When you say insert what do you mean.
Re: Comparator?
The aluminium bit in the end of the red thingy (Technical terms)
Re: Comparator?
think I can get them from reloading solutions....
"Death is nature's way of telling you to slow down." - Dick Sharples
Re: Comparator?
What is the comparator used for measuring.
I have one I use for COL but I dont think I have ever used a comparator.
I could do with some extra cases for different calibers will have to check out there web site see if they do them.
I have one I use for COL but I dont think I have ever used a comparator.
I could do with some extra cases for different calibers will have to check out there web site see if they do them.
Re: Comparator?
The comparator gives you a more accurate method of measuring finished rounds. The meplat can be damaged on a bullet and give you variances of up to ten thou so using a comparator gives you a more accurate reference point as it picks up off the ogive.
You still need to determine your OAL using whatever method you prefer but after that you measure with the comparator.
You still need to determine your OAL using whatever method you prefer but after that you measure with the comparator.
Who is online
Users browsing this forum: No registered users and 1 guest