It’s Glock o’clock

24" and less, a place to discuss all things handgun related, section 7.3. Long barrelled revolvers, long barrelled pistols and section 5. Overseas contributions are more than welcome.

Moderator: dromia

Message
Author
Gh0st
Posts: 785
Joined: Fri Aug 11, 2017 10:30 am
Home club or Range: FDPC
Location: West Country
Contact:

Re: It’s Glock o’clock

#11 Post by Gh0st »

Could save you the hassle?
All views expressed are my own unless otherwise stated! So please take your time to consider my opinions as biased to what i think is best....

http://www.bulletsandpixels.co.uk www.fdpc.org.uk
User avatar
safetyfirst
Past Supporter
Posts: 2646
Joined: Tue Nov 25, 2014 8:41 am
Contact:

Re: It’s Glock o’clock

#12 Post by safetyfirst »

Image

TA-DAAAAAAAAAA!

I’m off down the range with it next week, I’ll let you know how it goes!
Gh0st
Posts: 785
Joined: Fri Aug 11, 2017 10:30 am
Home club or Range: FDPC
Location: West Country
Contact:

Re: It’s Glock o’clock

#13 Post by Gh0st »

Love the colour, same as my new shotgun....
All views expressed are my own unless otherwise stated! So please take your time to consider my opinions as biased to what i think is best....

http://www.bulletsandpixels.co.uk www.fdpc.org.uk
User avatar
AL8
Posts: 680
Joined: Fri Sep 02, 2011 8:27 am
Location: Essex
Contact:

Re: It’s Glock o’clock

#14 Post by AL8 »

very nice, I bet you cant wait
JammyGuns
Posts: 127
Joined: Tue Feb 23, 2016 12:10 am
Contact:

Re: It’s Glock o’clock

#15 Post by JammyGuns »

Very cool indeed. What's the weight like?
J4mes
Posts: 123
Joined: Tue Oct 24, 2017 5:59 pm
Home club or Range: Classified
Contact:

Re: It’s Glock o’clock

#16 Post by J4mes »

Yep I like that, what's the price like?
User avatar
safetyfirst
Past Supporter
Posts: 2646
Joined: Tue Nov 25, 2014 8:41 am
Contact:

Re: It’s Glock o’clock

#17 Post by safetyfirst »

Base pistol with two ten rounders and a fifteen is £850 or a bit less.

That lot was £1035.

Weight is nice, balance is good I think, I’m just printing the suppressor insert. He sells them but I’m making my own.

Yes, the barrel stops just inside that can, the can is welded on and the end cap comes off.....

I’m going to play around with baffle designs, given the freedom of 3D printing, all sorts of twists and turns are possible when you don’t have to bend to the will of the lathe.
User avatar
bradaz11
Sporadic Site Supporter
Posts: 4714
Joined: Mon Jun 02, 2014 1:23 am
Home club or Range: The tunnel at Charmouth, BWSS
Location: Bristol
Contact:

Re: It’s Glock o’clock

#18 Post by bradaz11 »

so how do you clean the barrel? just leave the slide hanging over the barrel, or have they done something to slide so it can pass through?
When guns are outlawed, only Outlaws will have guns
Gh0st
Posts: 785
Joined: Fri Aug 11, 2017 10:30 am
Home club or Range: FDPC
Location: West Country
Contact:

Re: It’s Glock o’clock

#19 Post by Gh0st »

Is it for plinking only?
All views expressed are my own unless otherwise stated! So please take your time to consider my opinions as biased to what i think is best....

http://www.bulletsandpixels.co.uk www.fdpc.org.uk
User avatar
safetyfirst
Past Supporter
Posts: 2646
Joined: Tue Nov 25, 2014 8:41 am
Contact:

Re: It’s Glock o’clock

#20 Post by safetyfirst »

It’s strips like a regular Glock (the lower is Gen 3 compatible) and you can tilt the barrel to clean the breech face etc, it’s easy enough to clean but you cannot remove the barrel from the slide.

The barrel isn’t secured by anything to the frame, just like a regular pistol.

I’d be quite surprised if it turned out anywhere near as accurate as a k22 but not that surprised if it was as good as the GSG 1911.

It’s for steels and perhaps three gun type stuff, mostly it’s because Glock though, I’ve always loved them in the hand and the chance to own a legal one was far too tempting to pass up.

Range report next week with luck, depends somewhat on the snow....
Post Reply

Who is online

Users browsing this forum: No registered users and 14 guests