Page 2 of 2

Re: Adjustable cheek / comb raiser: Marlin Underlever:

Posted: Fri May 10, 2019 5:37 am
by 42DAF
Devil is in the detail of setting this up square in a jig to cut it all plumb. I use a bandsaw with a frame and pack the head of the stock to insure all is square and level. Thin blade nice and steady to make the cut then a template to transfer the cut out to top and bottom pieces. All cuts made on a milling machine with a router cutter fitted.

Rifles generally are quite straight forward as there are less void in the stock unlike some shotguns beretta 20 bores in particular

Re: Adjustable cheek / comb raiser: Marlin Underlever:

Posted: Tue May 14, 2019 10:41 am
by shellshokt
Those 'built in' cheek risers are a work of art. I'm a cheepskate however. It may not be pretty but is perfectly functional and cost about a tenner.
I piece of 6mm kydex cut, heated and folded. Two roofing bolts and a couple of nuts I had spare from a shooting trolley.
1894 Cheek Riser.jpg
I got the idea from here
https://www.amazon.com/Matthews-Fabrica ... B00G9PN4G2