Hobbyist bench to band saw for wood.

Anything non shooting related wanted.

Moderator: dromia

Forum rules
All groups are welcome to post unless your user name is in Newly Registered Red, your post will be removed.
No disparaging remarks, if you don't like what you see then don't buy it.
Message
Author
User avatar
dromia
Site Admin
Posts: 19242
Joined: Sat Nov 06, 2010 4:57 am
Home club or Range: The Highlands of Scotland. Cycling Proficiency 1964. Felton & District rifle club. HBSA full voting member. Durham Constabulary Gun Club Catterick. Teesdale Pistol and Rifle club.
Location: Sutherland and Co Durham
Contact:

Re: Hobbyist bench to band saw for wood.

#21 Post by dromia »

Here is a poor attempt at a description of the sort of work it would need to do, when reading this think "wooden Spoon".

Green 4" diameter by 8" long cherry branch good and knotty with the bark on.

Slab down to a 4" x 8" x 1" "plank".

Two lengthwise cuts 1 1/2" in from an end outside edge and 3 1/2" long.

These two cuts then removed with a cut into them from the outside edge. Leaving a sort of "T" shaped blank.
Image

Come on Bambi get some

Imperial Good Metric Bad
Analogue Good Digital Bad

Fecking stones

Real farmers don't need subsidies

Cow's farts matter!

For fine firearms and requisites visit

http://www.pukkabundhooks.com/
User avatar
Dellboy
Site Supporter 2021
Posts: 2461
Joined: Wed Aug 31, 2011 11:49 am
Home club or Range: Star Shooting Club
Location: Essex
Contact:

Re: Hobbyist bench to band saw for wood.

#22 Post by Dellboy »

Polchraine wrote:The detailed shape of a maple leaf - including the individual indents on the leaf lobes. Approx 300mm square and 50 thick.

any particular timber ?
2020 GOOD DEALS WITH

Cutch Vortex Scope
Mauserbill Enfield Books


Enjoy today as tomorrow might not come .

Noli pati a scelestis opprimi.

002515
FredB
Site Supporter Since 2019
Posts: 911
Joined: Fri Dec 10, 2010 8:33 pm
Home club or Range: stourport
Location: Wolverhampton
Contact:

Re: Hobbyist bench to band saw for wood.

#23 Post by FredB »

There are suitable saws at low prices at Machine Mart.
Fred
User avatar
Polchraine
Posts: 6046
Joined: Sat Nov 06, 2010 11:46 pm
Location: Middlesex
Contact:

Re: Hobbyist bench to band saw for wood.

#24 Post by Polchraine »

Dellboy wrote:
Polchraine wrote:The detailed shape of a maple leaf - including the individual indents on the leaf lobes. Approx 300mm square and 50 thick.

any particular timber ?
African Black Wood? or Bubinga?


"The trouble with quotes on the internet is that it's difficult to discern whether or not they are genuine."
- Abraham Lincoln

Why did kamikaze pilots wear helmets?

God loves stupid people, that is why he made so many of them.
User avatar
Dellboy
Site Supporter 2021
Posts: 2461
Joined: Wed Aug 31, 2011 11:49 am
Home club or Range: Star Shooting Club
Location: Essex
Contact:

Re: Hobbyist bench to band saw for wood.

#25 Post by Dellboy »

Polchraine wrote:
Dellboy wrote:
Polchraine wrote:The detailed shape of a maple leaf - including the individual indents on the leaf lobes. Approx 300mm square and 50 thick.

any particular timber ?
African Black Wood? or Bubinga?

black wood matters
2020 GOOD DEALS WITH

Cutch Vortex Scope
Mauserbill Enfield Books


Enjoy today as tomorrow might not come .

Noli pati a scelestis opprimi.

002515
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest