M1 Carbine Straight Pull

Pre 1945 action rifles. Muzzle loading.

Moderator: dromia

Message
Author
daryldiane
Posts: 161
Joined: Sat Oct 20, 2012 5:52 pm
Home club or Range: Bisley
Contact:

M1 Carbine Straight Pull

#1 Post by daryldiane »

Just read the NRA mag and see they are installing electronic targets at 100 and 200 yards on Short Siberia.
I do most of my shooting on electronics now days and see that M1 carbine should stay supersonic out to 200yrds and therefore register on the targets.
Does anyone have experience of the M1 carbine straight pulls? I've always fancied one and want to find a bit more about them, have read the GunMart review.
Thanks
DanTheMan
Past Supporter
Posts: 790
Joined: Sat Apr 07, 2012 8:38 pm
Home club or Range: Weybridge
Location: Bisley
Contact:

Re: M1 Carbine Straight Pull

#2 Post by DanTheMan »

Got one, it's brilliant.
Easy to download for indoor gallery ranges but when outdoors I have been getting great results on Fig12 targets at 300yds with irons.
You would have to play with a ballistic calc to see how long it stays supersonic

Image
daryldiane
Posts: 161
Joined: Sat Oct 20, 2012 5:52 pm
Home club or Range: Bisley
Contact:

Re: M1 Carbine Straight Pull

#3 Post by daryldiane »

Thanks
Yours looks great.
Do you handload or magtech or prvi
DanTheMan
Past Supporter
Posts: 790
Joined: Sat Apr 07, 2012 8:38 pm
Home club or Range: Weybridge
Location: Bisley
Contact:

Re: M1 Carbine Straight Pull

#4 Post by DanTheMan »

Neither, I bought a duff batch of WOLF which all needed pulling so I have several thousand cases to work with.
User avatar
Ovenpaa
Site Supporter Since 2015
Posts: 24680
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: M1 Carbine Straight Pull

#5 Post by Ovenpaa »

Is that a model 11 at the bottom?
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
DanTheMan
Past Supporter
Posts: 790
Joined: Sat Apr 07, 2012 8:38 pm
Home club or Range: Weybridge
Location: Bisley
Contact:

Re: M1 Carbine Straight Pull

#6 Post by DanTheMan »

Remington Model 31 Riot Gun dated 1941
User avatar
WelshShooter
Site Supporter Since 2016
Posts: 1804
Joined: Wed Jun 25, 2014 9:45 pm
Contact:

Re: M1 Carbine Straight Pull

#7 Post by WelshShooter »

I can pretty much ditto DanTheMan, it's good for Fig11/12 out to 300 yards with ease. I've had good experience with S&B round nose FMJ and H&N plated bullets in the 110gr weight area. You can easily make gallery loads using cast bullets in the same fashion as 357mag. There's no gas port to clog so you needn't worry using cast in the carbine. Hodgdon H110 and Viht N110 are go to powders for full power loads and Bullseye is good for gallery loads.

Apparently they feed better from original GI mags so make sure to keep an eye open for these if the provided mag doesn't work so well. I have a ten rounder and 4 x 15 rounders and they all feed well. Otherwise they're relatively easy rifles to operate and maintain. You have to remember not to short stroke it, when you pull the charging handle back just let it go rather than baby it forward otherwise it won't go into battery (always happens when I let someone shoot it even though I tell them multiple times...).

When looking for a rifle confirm which rear sight is fitted. There is a basic flip up aperture sight for two distances and there's a finer aperture sight with micrometer windage adjustment, a basic Google search will show you images of these. The elevation settings for the latter are 100/200/250/300 yards iirc but are good enough to get you on Fig11 targets at distances in between.

Image

Image
daryldiane
Posts: 161
Joined: Sat Oct 20, 2012 5:52 pm
Home club or Range: Bisley
Contact:

Re: M1 Carbine Straight Pull

#8 Post by daryldiane »

Thanks for that.
I mainly shoot at Bisley and will probably keep to factory rounds.
Now all I have to do is find one. The dealers offerings at 1600 are a bit rich.
Will wait and see if any private sales come up.
User avatar
Ovenpaa
Site Supporter Since 2015
Posts: 24680
Joined: Fri Nov 05, 2010 8:27 pm
Location: Årbjerg, Morsø DK
Contact:

Re: M1 Carbine Straight Pull

#9 Post by Ovenpaa »

DanTheMan wrote:Remington Model 31 Riot Gun dated 1941
Argh, the pump bit is a bit of a give-away. It was the compensator that caught my eye as the one I have coming has an identical one on it.
/d

Du lytter aldrig til de ord jeg siger. Du ser mig kun for det tøj jeg har paa ...

Shed Journal
User avatar
Ralph
Past Supporter
Posts: 73
Joined: Thu Dec 29, 2016 5:47 pm
Location: UK
Contact:

Re: M1 Carbine Straight Pull

#10 Post by Ralph »

There's one on this site, if it's the one I have seen it was in good nick.
A long way up country though.
http://sedbergh-shooting-club.com/sales/
Ralph NW UK
Interested in muzzle loading and anything that makes a loud noise and goes fast.
Post Reply

Who is online

Users browsing this forum: No registered users and 9 guests