Any UK sources for these?
e.g. https://www.whiddengunworks.com/product ... ump-gauge/
Shoulder bump gauge
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Shoulder bump gauge
Dave at the shooting shed does shoulder bump gauges. I use them all the time they are excellent.
https://www.shootingshed.co.uk/oscom/pr ... ucts_id=57
https://www.shootingshed.co.uk/oscom/pr ... ucts_id=57
- Ovenpaa
- Site Supporter Since 2015
- Posts: 24680
- Joined: Fri Nov 05, 2010 8:27 pm
- Location: Årbjerg, Morsø DK
- Contact:
Re: Shoulder bump gauge
The ones we make have a bottom section to ensure perfect alignment. I also have a feeling I was producing these quite a while before John started however I cannot be sure.
- mag41uk
- Posts: 1838
- Joined: Sat Oct 13, 2012 3:50 pm
- Home club or Range: Aldershot R & P Club
- Location: Reading
- Contact:
Re: Shoulder bump gauge
Thanks - will have a look David.
Who is online
Users browsing this forum: No registered users and 23 guests