Maxam GDB111
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
-
ukrifleman
- Past Supporter
- Posts: 728
- Joined: Thu Jun 07, 2012 7:26 pm
- Contact:
Maxam GDB111
Anyone used this powder for .308/30-06?
Re: Maxam GDB111
Where are you getting it from?
"Consciousness is a lie your brain tells you to make you think you know what you are doing." Professor Maria Goncalves.
If liberty means anything at all, it means the right to tell people what they do not want to hear. George Orwell.
If liberty means anything at all, it means the right to tell people what they do not want to hear. George Orwell.
-
ukrifleman
- Past Supporter
- Posts: 728
- Joined: Thu Jun 07, 2012 7:26 pm
- Contact:
-
Mike95
- Posts: 346
- Joined: Sat Jan 24, 2015 2:40 pm
- Home club or Range: Harrowden Rifle Club
- Contact:
Re: Maxam GDB111
Tests show it is almost identical to Vit N133...I order it from Clay and Game..
Mike95
Mike95
-
Triffid
- Past Supporter
- Posts: 407
- Joined: Thu Feb 27, 2014 2:36 pm
- Home club or Range: Wey Valley
- Contact:
Maxam GDB 111 powder
Anyone got experience of using Maxam GDB111? I'm picking up a tub of it at the Shooting Show mainly as it's cheap!
Information I have so far is:
Double base, cylindrical, high density powder.
Burn rate between Vihtavuori N133 & N135.
Load info available for .233 Remington, .243 Winchester, .270 Winchester, .308 Winchester & 30 06 Springfield from the manufacturer:
https://www.maxamcorp.com/en/cartridges ... nts/powder.
I've been using their PSB+2 powder as a Unique replacement in .44 Mag light loads for the last year and am really impressed with it. So I thought I'd give it a try in a rifle, probably .223 with a 69gn bullet.
Triffid
Information I have so far is:
Double base, cylindrical, high density powder.
Burn rate between Vihtavuori N133 & N135.
Load info available for .233 Remington, .243 Winchester, .270 Winchester, .308 Winchester & 30 06 Springfield from the manufacturer:
https://www.maxamcorp.com/en/cartridges ... nts/powder.
I've been using their PSB+2 powder as a Unique replacement in .44 Mag light loads for the last year and am really impressed with it. So I thought I'd give it a try in a rifle, probably .223 with a 69gn bullet.
Triffid
Who is online
Users browsing this forum: No registered users and 15 guests