off the top of my head I have Lee, RCBS, Lyman, Dillon, NDFS, CH4,----Probably some more.
All works, I have no preferred manufacturer.
Fred
Reloading Kit Recommendations
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Re: Reloading Kit Recommendations
The Lyman Crusher is an excellent single stage press. I have one on my bench. And in 34 years of reloading, my one single favourite bit of kit I bought, granted not at today's prices, was an RCBS Charge Master. Outstanding.Hixus wrote:With different manufacturer presses and dies, can it be mixed and matched as I’ve seen a lymans crusher 2 press for sale new for approximately £125 including p&p. I think I’ll go down the avenue of building my own set up. I’m more swayed to invest in the rcbs charge master or similar, that will take the powder scale and powder measure out in one hit.
I still have a set of beam scales though. And a set of Lee dippers, coupled with an RCBS tricker. Perfect for load development.
In 1978 I was told by my grand dad that the secret to rifle accuracy is, a quality bullet, fired down a quality barrel..... How has that changed?
Guns dont kill people. Dads with pretty Daughters do...!
Guns dont kill people. Dads with pretty Daughters do...!
Who is online
Users browsing this forum: No registered users and 4 guests