K22 - modding the moderator

24" and less, a place to discuss all things handgun related, section 7.3. Long barrelled revolvers, long barrelled pistols and section 5. Overseas contributions are more than welcome.

Moderator: dromia

Post Reply
Message
Author
User avatar
daman
Posts: 699
Joined: Tue Feb 17, 2015 12:11 am
Home club or Range: NRA, BASC, BDS, Larbert, UKPSA, Recoil
Location: Falkirk
Contact:

K22 - modding the moderator

#1 Post by daman »

I have the K22 Whisper LBP.

The moderator ('suppressor'/'silencer') is essentially just a can that screws over the 12in barrel.

The barrel itself is fluted and ported with several holes in the last third of each flute.

As the 'can' has no baffles at all I'm wondering if it could be made more effective - in terms of noise reduction - by filling or part filling it with exhaust silencer packing or similar.

Any one tried this?

Thoughts, good idea? bad idea?

-daman
User avatar
AL8
Posts: 681
Joined: Fri Sep 02, 2011 8:27 am
Location: Essex
Contact:

Re: K22 - modding the moderator

#2 Post by AL8 »

if you pack the can too much the air/noise will just come out the end of the barrel.
The filling needs to be loose enough to dissipate the flow so that it can move within the can.
Just my thoughts on it, I could be totally wrong :-)
Triffid
Posts: 407
Joined: Thu Feb 27, 2014 2:36 pm
Home club or Range: Wey Valley
Contact:

Re: K22 - modding the moderator

#3 Post by Triffid »

I read somewhere that woven wire mesh can be used in place of baffles. Haven't tried it though.
Triffid
User avatar
bradaz11
Full-Bore UK Supporter
Posts: 4765
Joined: Mon Jun 02, 2014 1:23 am
Home club or Range: The tunnel at Charmouth, BWSS
Location: Bristol
Contact:

Re: K22 - modding the moderator

#4 Post by bradaz11 »

wire wool - give it a go O:-) :twisted:
When guns are outlawed, only Outlaws will have guns
breacher

Re: K22 - modding the moderator

#5 Post by breacher »

I made my own suppressor - titanium mostly.

Have some material left over........... baffles ( some drilled, some blank, titanium tubing and titanium caps )

I can sell you some if you want to experiment.
User avatar
Blackstuff
Full-Bore UK Supporter
Posts: 7791
Joined: Sun Nov 07, 2010 1:01 pm
Contact:

Re: K22 - modding the moderator

#6 Post by Blackstuff »

bradaz11 wrote:wire wool - give it a go O:-) :twisted:
:o Not sure i'd put something that flammable in a sound mod! lol :run:
DVC
User avatar
bradaz11
Full-Bore UK Supporter
Posts: 4765
Joined: Mon Jun 02, 2014 1:23 am
Home club or Range: The tunnel at Charmouth, BWSS
Location: Bristol
Contact:

Re: K22 - modding the moderator

#7 Post by bradaz11 »

Blackstuff wrote:
bradaz11 wrote:wire wool - give it a go O:-) :twisted:
:o Not sure i'd put something that flammable in a sound mod! lol :run:
live a little!
When guns are outlawed, only Outlaws will have guns
User avatar
daman
Posts: 699
Joined: Tue Feb 17, 2015 12:11 am
Home club or Range: NRA, BASC, BDS, Larbert, UKPSA, Recoil
Location: Falkirk
Contact:

Re: K22 - modding the moderator

#8 Post by daman »

bradaz11 wrote:
Blackstuff wrote:
bradaz11 wrote:wire wool - give it a go O:-) :twisted:
:o Not sure i'd put something that flammable in a sound mod! lol :run:
live a little!
I think I'll pass on that ;-)
User avatar
daman
Posts: 699
Joined: Tue Feb 17, 2015 12:11 am
Home club or Range: NRA, BASC, BDS, Larbert, UKPSA, Recoil
Location: Falkirk
Contact:

Re: K22 - modding the moderator

#9 Post by daman »

breacher wrote:I made my own suppressor - titanium mostly.

Have some material left over........... baffles ( some drilled, some blank, titanium tubing and titanium caps )

I can sell you some if you want to experiment.
PM inbound
User avatar
BamBam
Posts: 2695
Joined: Thu Dec 19, 2013 5:23 pm
Location: Royston vasey
Contact:

Re: K22 - modding the moderator

#10 Post by BamBam »

In another country, in another time, I used pot scourers as can packing, but also made up a neoprene disc with an X cut into it as a muzzle wipe.

Image
Image
Post Reply

Who is online

Users browsing this forum: No registered users and 0 guests