Thanks - will appreciate that!
Fitting a Harris bipod to a Lee Enfield No 4 Mk2
Moderator: dromia
-
- Posts: 4
- Joined: Wed Feb 07, 2024 7:52 am
- Home club or Range: Northwood Rifle & Pistol Club / NRA Bisley
- Contact:
Re: Fitting a Harris bipod to a Lee Enfield No 4 Mk2
[/img]For any who may be interested - the "mod" proved easy and very effective. I removed the webbing loop from a spare sling swivel purchased on eBay, so that only the part held by the band screw remained (pic 1). The bipod then mounts onto this but requires the right amount of packing as Alpha1 mentioned. I used a Harris No. 7A adapter which is a wedge shaped rubber spacer (to compensate for the taper on the stock) as well as a piece of 4.5mm thick high density rubber cut to a similar size (pic 2). The bipod pulls up well against the stock and there is no permanent modification as the sling swivel can simply be refitted.
Re: Fitting a Harris bipod to a Lee Enfield No 4 Mk2
Yes that's how I did it.
- Mattnall
- Posts: 2865
- Joined: Wed Mar 06, 2013 5:32 pm
- Home club or Range: Harlow TAC, NRA, BSRC
- Contact:
Re: Fitting a Harris bipod to a Lee Enfield No 4 Mk2
Oh the sacrilege.
What's wrong with an old sandbag? It was good enough for my granddad.
What's wrong with an old sandbag? It was good enough for my granddad.
Arming the Country, one gun at a time.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Good deals with Paul101, Charlotte the flyer, majordisorder, Charlie Muggins, among others. Thanks everybody.
Who is online
Users browsing this forum: No registered users and 2 guests