Tr140? Bisley
Moderator: dromia
Forum rules
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
All handloading data posted on Full-Bore UK from 23/2/2021 must reference the published pressure tested data it was sourced from, posts without such verification will be removed.
Any existing data without such a reference should be treated as suspect and not used.
Use reloading information posted here at your own risk. This forum (http://www.full-bore.co.uk) is not responsible for any property damage or personal injury as a consequence of using reloading data posted here, the information is individual members findings and observations only. Always verify the load data and be absolutely sure your firearm can handle the load, especially older ones. If in doubt start low and work your way up.
Tr140? Bisley
Will be passing bisley today and plan on stopping in, we're on site can I buy a couple of KG of tr140
Thanks
Thanks
-
- Site Supporter Since 2015
- Posts: 760
- Joined: Mon Dec 06, 2010 1:28 pm
- Home club or Range: Cornwall RC @ Millpool; Duchy Shooting Assn @ Zelah
- Location: Cornwall
- Contact:
Re: Tr140? Bisley
I'm not sure if you'll get TR140 from Bisley other than at a 'Big Shoot'. Only Fulton's and NRA Office are there all the time. Try them and let us know.
I get mine from HPS but there are other suppliers, Dolphin Arms and Fox Firearms I think?
I was quoted £36 for carrier fees for 3 kg package of primers and powder!!!!!!
Hope this helps
JohnG :cornwall:
I get mine from HPS but there are other suppliers, Dolphin Arms and Fox Firearms I think?
I was quoted £36 for carrier fees for 3 kg package of primers and powder!!!!!!
Hope this helps
JohnG :cornwall:
-
- Past Supporter
- Posts: 792
- Joined: Sat Apr 07, 2012 8:38 pm
- Home club or Range: Weybridge
- Location: Bisley
- Contact:
Re: Tr140? Bisley
ITL (if he's in) is just 10 mins away, he's got it at £55 per KG
Re: Tr140? Bisley
E-mail the importer at, commonside at compuserve dot com.
He lives on Bisley Camp at you can arrange a time to collect.
He lives on Bisley Camp at you can arrange a time to collect.
Re: Tr140? Bisley
Managed to grab some today, thanks to rox for sorting it for me
Re: Tr140? Bisley
thinking of buying a kilo of this for my 308 set up to replace the n130...wondered if it would be any good for 303 as well - any recommendations please guys?
thanks
Jon
thanks
Jon
'Windage & Elevation Miss. Langdon - Windage & Elevation!'
Re: Tr140? Bisley
Read the threads on .303
As I have previously stated on a .303 thread, TR140 is my powder of choice for .303 and .308. I find that TR140 outperforms N140 in both .303 and .308.
As I have previously stated on a .303 thread, TR140 is my powder of choice for .303 and .308. I find that TR140 outperforms N140 in both .303 and .308.
Re: Tr140? Bisley
thanks mate - just seen it after i posted
good info
!
![Embarrassed :oops:](./images/smilies/icon_redface.gif)
good info
![thumpup :good:](./images/smilies/icon_thumbup.gif)
![cheers cheers](./images/smilies/cheers2.gif)
'Windage & Elevation Miss. Langdon - Windage & Elevation!'
- Ovenpaa
- Site Supporter Since 2015
- Posts: 24680
- Joined: Fri Nov 05, 2010 8:27 pm
- Location: Årbjerg, Morsø DK
- Contact:
Re: Tr140? Bisley
Steve, have you found as a percentage a common figure for the increase in grains of TR140 versus N140 to maintain MV's?
Re: Tr140? Bisley
I really want to try tr140 in my 30-06 @ £55 a Kilo. Has anyone got the load data for 308 from the manufacture?
Who is online
Users browsing this forum: No registered users and 10 guests